參數(shù)資料
型號: TS87C51RD2-VLMR
廠商: ATMEL CORP
元件分類: 微控制器/微處理器
英文描述: 8-BIT, OTPROM, 40 MHz, MICROCONTROLLER, PQFP64
封裝: 1.40 MM HEIGHT, VQFP-64
文件頁數(shù): 23/83頁
文件大?。?/td> 8336K
代理商: TS87C51RD2-VLMR
21
8021G–AVR–03/11
ATmega329P/3290P
be used. If a reset occurs while a write operation is in progress, the write operation will be com-
pleted provided that the power supply voltage is sufficient.
7.5
I/O Memory
The I/O space definition of the ATmega329P/3290P is shown in ”Register Summary” on page
All ATmega329P/3290P I/Os and peripherals are placed in the I/O space. All I/O locations may
be accessed by the LD/LDS/LDD and ST/STS/STD instructions, transferring data between the
32 general purpose working registers and the I/O space. I/O Registers within the address range
0x00 - 0x1F are directly bit-accessible using the SBI and CBI instructions. In these registers, the
value of single bits can be checked by using the SBIS and SBIC instructions. Refer to the
instruction set section for more details. When using the I/O specific commands IN and OUT, the
I/O addresses 0x00 - 0x3F must be used. When addressing I/O Registers as data space using
LD and ST instructions, 0x20 must be added to these addresses. The ATmega329P/3290P is a
complex microcontroller with more peripheral units than can be supported within the 64 location
reserved in Opcode for the IN and OUT instructions. For the Extended I/O space from 0x60 -
0xFF in SRAM, only the ST/STS/STD and LD/LDS/LDD instructions can be used.
For compatibility with future devices, reserved bits should be written to zero if accessed.
Reserved I/O memory addresses should never be written.
Some of the Status Flags are cleared by writing a logical one to them. Note that, unlike most
other AVRs, the CBI and SBI instructions will only operate on the specified bit, and can therefore
be used on registers containing such Status Flags. The CBI and SBI instructions work with reg-
isters 0x00 to 0x1F only.
The I/O and peripherals control registers are explained in later sections.
The ATmega329P/3290P contains three General Purpose I/O Registers. These registers can be
used for storing any information, and they are particularly useful for storing global variables and
Status Flags. General Purpose I/O Registers within the address range 0x00 - 0x1F are directly
bit-accessible using the SBI, CBI, SBIS, and SBIC instructions.
相關PDF資料
PDF描述
TS87C51RB2-VLEB 8-BIT, OTPROM, 40 MHz, MICROCONTROLLER, PQFP44
TS80C52X2-LLCB 8-BIT, MROM, 30 MHz, MICROCONTROLLER, PQFP44
TS80C51RA2-VLBB 8-BIT, 40 MHz, MICROCONTROLLER, PQCC44
TS87C52X2-VLEB 8-BIT, OTPROM, 40 MHz, MICROCONTROLLER, PQFP44
TS87C54X2-VLBB 8-BIT, OTPROM, 40 MHz, MICROCONTROLLER, PQCC44
相關代理商/技術參數(shù)
參數(shù)描述
TS87C51U2 制造商:TEMIC 制造商全稱:TEMIC Semiconductors 功能描述:Double UART 8-bit CMOS Microcontroller, 0-60 MHz
TS87C51U2-EA 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Microcontroller
TS87C51U2-EB 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Microcontroller
TS87C51U2-EE 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Microcontroller
TS87C51U2-EJ 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Microcontroller