
OE
AR
1R
2R
BR
AG
1G
2G
BG
AB
1B
GND
VCC
BSCL
2SCL
1SCL
ASCL
BSCA
2SCA
1SCA
ASCA
BB
2B
SEL
1
2
3
4
5
6
7
8
9
10
11
12
24
23
22
21
20
19
18
17
16
15
14
13
SCDS317
– MARCH 2011
5V, 5-BITS VIDEO EXCHANGE SWITCH FOR DUAL VGA SOURCE TO SINK -2V
UNDERSHOOT PROTECTION WITH LOW ON-STATE RESISTANCE
1
FEATURES
APPLICATIONS
Digital and Analog Signal Interface
Bidirectional Data Flow, With Near-Zero
Propagation Delay
Audio and Video Signal Interface
High Bandwidth, 380MHZ (typ) RGB Switching
High Speed Signal Bus Exchange
Low ON-State Resistance (ron) Characteristics
Bus Isolation, Interleaving
(ron =3
Ω Typical)
Notebook Computer Graphics Control
Low Input/Output Capacitance Minimizes
Loading and Signal Distortion (CIO(OFF) = 8pF
Typical)
Undershoot Clamp Diodes on Data and
Control Inputs.
Low Power Consumption (Icc = 3uA Max.)
Vcc Operation Range from 4V to 5.5V
Data I/Os Support 0 to 5-V Signaling Levels
(0.8V, 1.2V, 1.5V, 1.8V, 2.5V, 3.3V, 4V)
Allow to pull up resistor up to 5V on the I/O
Ioff Supports Live Insertion, Partial Power
Down Mode, and Back Drive Protection
Latch-Up Performance Exceeds 100Ma Per
JESD 78, Class II.
ESD Performance Tested Per JESD 22
– 2000-V Human-Body Model
(A114-B, Class II)
– 200-V Machine Model (A115-A)
– 1000-V Charged-Device Model (C101)
DESCRIPTION
The TS5V522C is high bandwidth analog switches offering a 2:2 dual-graphics crossover solution for VGA signal
switching. The device is designed for switching between 2 VGA sources to either of the two destinations within a
laptop computer. The TS5V522C integrates 5 very high-frequency 380Mhz (typ) SPDT switches for RGB signals,
2 pairs of level-translating buffer for the HSYNC and VSYNC lines, and integrated ESD protection. The 5
crossover switches can be controlled by either 5V or 3.3V TTL control signals.
The TS5V522C would bypass the VGA analog signal to destination with less distortions. DDC Channel (SCA,
SCL) may require to +5Vopen drain level at the VGA connector and it may require a pull up resistor on the
destination side. Active undershoot-protection circuitry on the data ports of the TS5V522C provide protection for
undershoots up to -2V by sensing an undershoot event and ensuring that the switch remains in the proper off
state.
To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pull up
resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Copyright
2011, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.