參數資料
型號: TPS65120RGTT
廠商: TEXAS INSTRUMENTS INC
元件分類: 穩壓器
英文描述: 0.2 A SWITCHING REGULATOR, 4000 kHz SWITCHING FREQ-MAX, PQCC16
封裝: 3 X 3 MM, 0.90 MM HEIGHT, GREEN, PLASTIC, QFN-16
文件頁數: 10/30頁
文件大小: 1047K
代理商: TPS65120RGTT
www.ti.com
SWN
TPS65120
D1
L1
10
C1
2.2
VIN
2.7 V to 5.5 V
VGL
down to 18 V/2 mA
C3
100 nF
R4
R3
SWP
FBL
VMAIN
FBM
C5
220 nF
R6
R5
VMAIN
3.0 V to 5.3 V/25 mA
C4
1
BOOT
VGH
C2
100 nF
VGH
up to 20 V/2 mA
PGND
AGND
FBH
RUN
VAUX
3.3 V/20 mA
EN
VIN
A
GATE
LDOIN
LDOOUT
C6
220 nF
R1
R2
F
H
INDUCTOR SELECTION
TPS65120, TPS65121, TPS65123, TPS65124
SLVS531A – JUNE 2004 – REVISED MARCH 2005
APPLICATION INFORMATION (continued)
The larger the feed-forward capacitor the worse the load regulation of the device. Therefore, when concern for
load regulation is paramount, select a capacitor value as small as possible. Another possibility to further reduce
ripple voltage on VGH and VGL outputs is to increase output-capacitor values (C2, C3).
Figure 22. Typical Application
Since the control scheme of the TPS6512x device is inherently stable, the inductor value does not affect the
stability of the converter. To operate the TPS6512x properly at full performance, choose inductors in the range
8.2 H to 10 H.
The selection of the inductor is primarily based on the required output power. The variable peak current PWM
control scheme used in TPS6512x automatically adapts the peak inductor current (between 65mA typ. and
150mA typ.) depending on output power and input voltage.
At moderate loads, the converter typically operates with a peak inductor current in the range of 65mA to 100mA,
allowing the use of inductors in the 0603 case size. In order not to saturate the inductor when operating at a
higher output power, select an inductor with a higher saturation-current rating.
The inductor series in Table 1 from various suppliers have been used with the TPS6512x converter.
Table 1. List of Inductors
MANUFACTURER
SERIES
DIMENSIONS
LQ LB1608
1.6 x 0.8 x 0.8 = 1.02 mm3
TAIYO YUDEN
LQ CB2012
2.0 x 1.2 x 1.2 = 2.88 mm3
LQ CBL2012
2.0 x 1.2 x 1.0 = 2.40 mm3
GLF1608
1.6 x 0.8 x 0.8 = 1.02 mm3
TDK
GLF2012
2.0 x 1.2 x 1.2 = 2.88 mm3
18
相關PDF資料
PDF描述
TPS2066DGN 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO8
TPS2552DBV-1 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO6
TPS54614PWPRG4 12 A SWITCHING REGULATOR, 762 kHz SWITCHING FREQ-MAX, PDSO28
TPS3836H30DBVTG4 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO5
TPS40050PWPRG4 0.2 A SWITCHING CONTROLLER, 1000 kHz SWITCHING FREQ-MAX, PDSO16
相關代理商/技術參數
參數描述
TPS65120RGTTG4 功能描述:LCD 驅動器 Sgl-Inductor Qd-Otp Supply RoHS:否 制造商:Maxim Integrated 數位數量:4.5 片段數量:30 最大時鐘頻率:19 KHz 工作電源電壓:3 V to 3.6 V 最大工作溫度:+ 85 C 最小工作溫度:- 20 C 封裝 / 箱體:PDIP-40 封裝:Tube
TPS65121RGTR 功能描述:LCD 驅動器 Sgl-Inductor Qd-Otp Supply RoHS:否 制造商:Maxim Integrated 數位數量:4.5 片段數量:30 最大時鐘頻率:19 KHz 工作電源電壓:3 V to 3.6 V 最大工作溫度:+ 85 C 最小工作溫度:- 20 C 封裝 / 箱體:PDIP-40 封裝:Tube
TPS65121RGTRG4 功能描述:LCD 驅動器 Sgl-Inductor Qd-Otp Supply RoHS:否 制造商:Maxim Integrated 數位數量:4.5 片段數量:30 最大時鐘頻率:19 KHz 工作電源電壓:3 V to 3.6 V 最大工作溫度:+ 85 C 最小工作溫度:- 20 C 封裝 / 箱體:PDIP-40 封裝:Tube
TPS65121RGTT 功能描述:LCD 驅動器 Sgl-Inductor Qd-Otp Supply RoHS:否 制造商:Maxim Integrated 數位數量:4.5 片段數量:30 最大時鐘頻率:19 KHz 工作電源電壓:3 V to 3.6 V 最大工作溫度:+ 85 C 最小工作溫度:- 20 C 封裝 / 箱體:PDIP-40 封裝:Tube
TPS65121RGTTG4 功能描述:LCD 驅動器 Sgl-Inductor Qd-Otp Supply RoHS:否 制造商:Maxim Integrated 數位數量:4.5 片段數量:30 最大時鐘頻率:19 KHz 工作電源電壓:3 V to 3.6 V 最大工作溫度:+ 85 C 最小工作溫度:- 20 C 封裝 / 箱體:PDIP-40 封裝:Tube