- 您現在的位置：買賣IC網 > PDF目錄69511 > TPS54332DDAR (TEXAS INSTRUMENTS INC) SWITCHING REGULATOR, 1200 kHz SWITCHING FREQ-MAX, PDSO8 PDF資料下載
參數資料
| 型號： | TPS54332DDAR |
| 廠商： | TEXAS INSTRUMENTS INC |
| 元件分類： | 穩壓器 |
| 英文描述： | SWITCHING REGULATOR, 1200 kHz SWITCHING FREQ-MAX, PDSO8 |
| 封裝： | PLASTIC, SOIC-8 |
| 文件頁數： | 5/26頁 |
| 文件大?。?/td> | 986K |
| 代理商： | TPS54332DDAR |
(
)
OPPMAX
max
LPP
SW
O
D
0.5
V
ESR
=
I
4
F
C
-
(
)
12
OUT
IN(MAX)
OUT
COUT(RMS)
IN(MAX)
OUT
SW
C
V
× V
V
1
I
=
×
V
× L
× F
× N
-
÷
÷
è
ggm
REF
DC
O
V
G
=
V
(
)
p
PO
OO
Z
F
= 1/ 2
R
C
(
)
Z1
Z
F
= 1/ 2
R
C
p
(
)
P1
Z
P
F
= 1/ 2
R
C
p
www.ti.com
SLVS875A – JANUARY 2009 – REVISED MARCH 2010
(13)
Where VOPPMAX is the desired maximum peak-to-peak output ripple. The maximum RMS ripple current in the
output capacitor is given by Equation 14.
(14)
The minimum switching frequency should be used in the above equations (derated by a factor of 0.8). For this
design example, two 47-mF ceramic output capacitors are chosen for C2 and C3. These are rated at 10 V with a
maximum ESR of 3 m
and a ripple current rating in excess of 3 A. The calculated total RMS ripple current is
300 mA ( 150 mA each) and the total ESR required is 20 m
or less. These output capacitors exceed the
requirements by a wide margin and will result in a reliable, high-performance design. it is important to note that
the actual capacitance in circuit may be less than the catalog value when the output is operating at the desired
output of 2.5 V. 10 V rated capacitors are used to minimize the this reduction in capacitance due to dc voltage on
the output. The selected output capacitor must be rated for a voltage greater than the desired output voltage plus
the ripple voltage. Any derating amount must also be included. Other capacitor types work well with the
TPS54332, depending on the needs of the application.
COMPENSATION COMPONENTS
The external compensation used with the TPS54332 allows for a wide range of output filter configurations. A
large range of capacitor values and types of dielectric are supported. The design example uses ceramic X5R
dielectric output capacitors, but other types are supported.
A Type II compensation scheme is recommended for the TPS54332. The compensation components are chosen
to set the desired closed loop cross over frequency and phase margin for output filter components. The type II
compensation has the following characteristics; a dc gain component, a low frequency pole, and a mid frequency
zero / pole pair.
The dc gain is determined by Equation 15:
(15)
Where:
Vggm = 800
VREF = 0.8 V
The low-frequency pole is determined by Equation 16:
(16)
ROA = 8.696 M.
The mid-frequency zero is determined by Equation 17:
(17)
And, the mid-frequency pole is given by Equation 18:
(18)
The first step is to choose the closed loop crossover frequency. The closed-loop crossover frequency should be
less than 1/8 of the minimum operating frequency, but for the TPS54332 it is recommended that the maximum
closed loop crossover frequency be not greater than 75 kHz. Next, the required gain and phase boost of the
crossover network needs to be calculated. By definition, the gain of the compensation network must be the
inverse of the gain of the modulator and output filter. For this design example, where the ESR zero is much
higher than the closed loop crossover frequency, the gain of the modulator and output filter can be approximated
by Equation 19:
Copyright 2009–2010, Texas Instruments Incorporated
13
Product Folder Link(s): TPS54332
相關PDF資料 |
PDF描述 |
|---|---|
| TPS54350PWPR | 6.5 A SWITCHING REGULATOR, 700 kHz SWITCHING FREQ-MAX, PDSO16 |
| TPS54350PWP | 6.5 A SWITCHING REGULATOR, 700 kHz SWITCHING FREQ-MAX, PDSO16 |
| TPS54355PWPRG4 | 6.5 A SWITCHING REGULATOR, 600 kHz SWITCHING FREQ-MAX, PDSO16 |
| TPS54353PWPR | 6.5 A SWITCHING REGULATOR, 600 kHz SWITCHING FREQ-MAX, PDSO16 |
| TPS54356PWPG4 | 6.5 A SWITCHING REGULATOR, 600 kHz SWITCHING FREQ-MAX, PDSO16 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| TPS54332EVM-416 | 功能描述:電源管理IC開發工具 5-15V,3A,SWIFT Buck Converter Eval Mod RoHS:否 制造商:Maxim Integrated 產品:Evaluation Kits 類型:Battery Management 工具用于評估:MAX17710GB 輸入電壓: 輸出電壓:1.8 V |
| TPS54334DDA | 功能描述:Buck Switching Regulator IC Positive Adjustable 0.8V 1 Output 3A 8-PowerSOIC (0.154", 3.90mm Width) 制造商:texas instruments 系列:- 包裝:管件 零件狀態:有效 功能:降壓 輸出配置:正 拓撲:降壓 輸出類型:可調式 輸出數:1 電壓 - 輸入（最小值）:4.2V 電壓 - 輸入（最大值）:28V 電壓 - 輸出（最小值/固定）:0.8V 電壓 - 輸出（最大值）:24V 電流 - 輸出:3A 頻率 - 開關:570kHz 同步整流器:是 工作溫度:-40°C ~ 150°C（TJ） 安裝類型:表面貼裝 封裝/外殼:8-PowerSOIC（0.154"，3.90mm 寬） 供應商器件封裝:8-SO PowerPad 標準包裝:75 |
| TPS54334DDAR | 功能描述:IC REG BUCK ADJ 3A SYNC PWR8SO 制造商:texas instruments 系列:* 零件狀態:在售 標準包裝:1 |
| TPS54334DRCT | 功能描述:Buck Switching Regulator IC Positive Adjustable 0.8V 1 Output 3A 10-VFDFN Exposed Pad 制造商:texas instruments 系列:- 包裝:剪切帶（CT） 零件狀態:有效 功能:降壓 輸出配置:正 拓撲:降壓 輸出類型:可調式 輸出數:1 電壓 - 輸入（最小值）:4.2V 電壓 - 輸入（最大值）:28V 電壓 - 輸出（最小值/固定）:0.8V 電壓 - 輸出（最大值）:24V 電流 - 輸出:3A 頻率 - 開關:570kHz 同步整流器:是 工作溫度:-40°C ~ 85°C（TA） 安裝類型:表面貼裝 封裝/外殼:10-VFDFN 裸露焊盤 供應商器件封裝:10-VSON（3x3） 標準包裝:1 |
| TPS54334EVM-722 | 功能描述:TPS54334 SWIFT? DC/DC, Step Down 1, Non-Isolated Outputs Evaluation Board 制造商:texas instruments 系列:SWIFT?? 零件狀態:有效 主要用途:DC/DC，步降 輸出和類型:1，非隔離 功率 - 輸出:- 電壓 - 輸出:3.3V 電流 - 輸出:3A 電壓 - 輸入:4.2 V ~ 28 V 穩壓器拓撲:降壓 頻率 - 開關:570kHz 板類型:完全填充 所含物品:板 使用的 IC/零件:TPS54334 標準包裝:1 |
發布緊急采購，3分鐘左右您將得到回復。