<tfoot id="a1aqi"><ul id="a1aqi"></ul></tfoot>
  • <pre id="a1aqi"><span id="a1aqi"></span></pre>
  • <pre id="a1aqi"></pre>
    <thead id="a1aqi"><ul id="a1aqi"><input id="a1aqi"></input></ul></thead>
  • 參數資料
    型號: TMS320C28PHL
    元件分類: 數字信號處理
    英文描述: 16-Bit Digital Signal Processor
    中文描述: 16位數字信號處理器
    文件頁數: 62/132頁
    文件大?。?/td> 1707K
    代理商: TMS320C28PHL
    SPRS145G
    JULY 2000
    REVISED FEBRUARY 2002
    62
    POST OFFICE BOX 1443
    HOUSTON, TEXAS 77251
    1443
    low-power modes
    The 240xA has an IDLE instruction. When executed, the IDLE instruction stops the clocks to all circuits in the
    CPU, but the clock output from the CPU continues to run. With this instruction, the CPU clocks can be shut down
    to save power while the peripherals (clocked with CLKOUT) continue to run. The CPU exits the IDLE state if
    it is reset, or, if it receives an interrupt request.
    clock domains
    All 240xA-based devices have two clock domains:
    1.
    CPU clock domain
    consists of the clock for most of the CPU logic
    2.
    System clock domain
    consists of the peripheral clock (which is derived from CLKOUT of the CPU) and
    the clock for the interrupt logic in the CPU.
    When the CPU goes into IDLE mode, the CPU clock domain is stopped while the system clock domain continues
    to run. This mode is also known as IDLE1 mode. The 240xA CPU also contains support for a second IDLE mode,
    IDLE2. By asserting IDLE2 to the 240xA CPU, both the CPU clock domain and the system clock domain are
    stopped, allowing further power savings. A third low-power mode, HALT mode, the deepest, is possible if the
    oscillator and WDCLK are also shut down when in IDLE2 mode.
    Two control bits, LPM1 and LPM0, specify which of the three possible low-power modes is entered when the
    IDLE instruction is executed (see Table 11). These bits are located in the System Control and Status
    Register 1 (SCSR1), and they are described in the
    TMS320LF/LC240xA DSP Controllers Reference Guide:
    System and Peripherals
    (literature number SPRU357).
    Table 11. Low-Power Modes Summary
    LOW-POWER MODE
    LPMx BITS
    SCSR1
    [13:12]
    CPU
    CLOCK
    DOMAIN
    SYSTEM
    CLOCK
    DOMAIN
    WDCLK
    STATUS
    PLL
    STATUS
    OSC
    STATUS
    FLASH
    POWER
    EXIT
    CONDITION
    CPU running normally
    XX
    On
    On
    On
    On
    On
    On
    IDLE1
    (LPM0)
    00
    Off
    On
    On
    On
    On
    On
    Peripheral
    Interrupt,
    External Interrupt,
    Reset,
    PDPINTA/B
    IDLE2
    (LPM1)
    01
    Off
    Off
    On
    On
    On
    On
    Wakeup
    Interrupts,
    External Interrupt,
    Reset,
    PDPINTA/B
    HALT
    (LPM2)
    [PLL/OSC power down]
    1X
    Off
    Off
    Off
    Off
    Off
    Off
    Reset,
    PDPINTA/B
    The Flash must be powered down by the user code prior to entering LPM2. For more details, see the
    TMS320LF/LC240xA DSP Controllers
    Reference Guide: System and Peripherals
    (literature number SPRU357).
    other power-down options
    240xA devices have clock-enable bits to the following on-chip peripherals: ADC, SCI, SPI, CAN, EVB, and EVA.
    Clock to these peripherals are disabled after reset; thus, start-up power can be low for the device.
    Depending on the application, these peripherals can be turned on/off to achieve low power.
    Refer to the SCSR1 register for details on the peripheral clock enable bits.
    相關PDF資料
    PDF描述
    TMS320C2XDIGITALSIGNALPROCESSORS 16-Bit Digital Signal Processor
    TMS320C30-40 Digital Signal Processor
    TMS320C30-50 Digital Signal Processor
    TMS320C30GEL33 32-Bit Digital Signal Processor
    TMS320C30GEL40 32-Bit Digital Signal Processor
    相關代理商/技術參數
    參數描述
    TMS320C2FNAR 制造商:Texas Instruments 功能描述:
    TMS320C2XDIGITALSIGNALPROCESSORS 制造商:未知廠家 制造商全稱:未知廠家 功能描述:16-Bit Digital Signal Processor
    TMS320C30 制造商:TI 制造商全稱:Texas Instruments 功能描述:DIGITAL SIGNAL PROCESSOR
    TMS320C30_06 制造商:TI 制造商全稱:Texas Instruments 功能描述:DIGITAL SIGNAL PROCESSOR
    TMS320C30_08 制造商:TI 制造商全稱:Texas Instruments 功能描述:DIGITAL SIGNAL PROCESSOR