• <nobr id="b5mcf"></nobr>
    • <pre id="b5mcf"><td id="b5mcf"></td></pre>
      <small id="b5mcf"><sup id="b5mcf"></sup></small>
      參數資料
      型號: TMP320LC2403APGA
      廠商: Texas Instruments, Inc.
      元件分類: 數字信號處理
      英文描述: DSP CONTROLLERS
      中文描述: DSP控制器
      文件頁數: 1/134頁
      文件大小: 1759K
      代理商: TMP320LC2403APGA
      TMS320LF2407A,TMS320LF2406A,TMS320LF2403A,TMS320LF2402A
      TMS320LC2406A,TMS320LC2404A,TMS320LC2403A,TMS320LC2402A
      DSP CONTROLLERS
      SPRS145K
      JULY 2000
      REVISED AUGUST 2005
      1
      POST OFFICE BOX 1443
      HOUSTON, TEXAS 77251
      1443
      High-Performance Static CMOS Technology
      25-ns Instruction Cycle Time (40 MHz)
      40-MIPS Performance
      Low-Power 3.3-V Design
      Based on TMS320C2xx DSP CPU Core
      Code-Compatible With F243/F241/C242
      Instruction Set and Module Compatible
      With F240
      Flash (LF) and ROM (LC) Device Options
      LF240xA:
      LF2407A, LF2406A,
      LF2403A, LF2402A
      LC240xA: LC2406A, LC2404A,
      LC2403A, LC2402A
      On-Chip Memory
      Up to 32K Words x 16 Bits of Flash
      EEPROM (4 Sectors) or ROM
      Programmable “Code-Security” Feature
      for the On-Chip Flash/ROM
      Up to 2.5K Words x 16 Bits of
      Data/Program RAM
      544 Words of Dual-Access RAM
      Up to 2K Words of Single-Access RAM
      Boot ROM (LF240xA Devices)
      SCI/SPI Bootloader
      Up to Two Event-Manager (EV) Modules
      (EVA and EVB), Each Includes:
      Two 16-Bit General-Purpose Timers
      Eight 16-Bit Pulse-Width Modulation
      (PWM) Channels Which Enable:
      Three-Phase Inverter Control
      Center- or Edge-Alignment of PWM
      Channels
      Emergency PWM Channel Shutdown
      With External PDPINTx Pin
      Programmable Deadband (Deadtime)
      Prevents Shoot-Through Faults
      Three Capture Units for Time-Stamping
      of External Events
      Input Qualifier for Select Pins
      On-Chip Position Encoder Interface
      Circuitry
      Synchronized A-to-D Conversion
      Designed for AC Induction, BLDC,
      Switched Reluctance, and Stepper Motor
      Control
      Applicable for Multiple Motor and/or
      Converter Control
      Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
      Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
      External Memory Interface (LF2407A)
      192K Words x 16 Bits of Total Memory:
      64K Program, 64K Data, 64K I/O
      Watchdog (WD) Timer Module
      10-Bit Analog-to-Digital Converter (ADC)
      8 or 16 Multiplexed Input Channels
      500-ns MIN Conversion Time
      Selectable Twin 8-State Sequencers
      Triggered by Two Event Managers
      Controller Area Network (CAN) 2.0B Module
      (LF2407A, 2406A, 2403A)
      Serial Communications Interface (SCI)
      16-Bit Serial Peripheral Interface (SPI)
      (LF2407A, 2406A, LC2404A, 2403A)
      Phase-Locked-Loop (PLL)-Based Clock
      Generation
      Up to 40 Individually Programmable,
      Multiplexed General-Purpose Input/Output
      (GPIO) Pins
      Up to Five External Interrupts (Power Drive
      Protection, Reset, Two Maskable Interrupts)
      Power Management:
      Three Power-Down Modes
      Ability to Power Down Each Peripheral
      Independently
      Real-Time JTAG-Compliant Scan-Based
      Emulation, IEEE Standard 1149.1
      (JTAG)
      Development Tools Include:
      Texas Instruments (TI) ANSI C Compiler,
      Assembler/Linker, and Code Composer
      Studio
      Debugger
      Evaluation Modules
      Scan-Based Self-Emulation (XDS510
      )
      Broad Third-Party Digital Motor Control
      Support
      Package Options
      144-Pin LQFP PGE (LF2407A)
      100-Pin LQFP PZ (2406A, LC2404A)
      64-Pin TQFP PAG (LF2403A, LC2403A,
      LC2402A)
      64-Pin QFP PG (2402A)
      Extended Temperature Options (A and S)
      A:
      40
      °
      C to 85
      °
      C
      S:
      40
      °
      C to 125
      °
      C
      Copyright
      2005, Texas Instruments Incorporated
      Code Composer Studio and XDS510 are trademarks of Texas Instruments.
      Other trademarks are the property of their respective owners.
      IEEE Standard 1149.1
      1990, IEEE Standard Test-Access Port; however, boundary scan is not supported in this device family.
      PRODUCTIONDATA information is current as of publication date.
      Products conform to specifications per the terms of Texas Instruments
      standard warranty. Production processing does not necessarily include
      testing of all parameters.
      相關PDF資料
      PDF描述
      TMP320LC2403APGEA DSP CONTROLLERS
      TMP320LC2403APGES DSP CONTROLLERS
      TMP320LC2403APGS DSP CONTROLLERS
      TMP320LC2403APZA DSP CONTROLLERS
      TMP320LC2403APZS DSP CONTROLLERS
      相關代理商/技術參數
      參數描述
      TMP320LC2403APGEA 制造商:TI 制造商全稱:Texas Instruments 功能描述:DSP CONTROLLERS
      TMP320LC2403APGES 制造商:TI 制造商全稱:Texas Instruments 功能描述:DSP CONTROLLERS
      TMP320LC2403APGS 制造商:TI 制造商全稱:Texas Instruments 功能描述:DSP CONTROLLERS
      TMP320LC2403APZA 制造商:TI 制造商全稱:Texas Instruments 功能描述:DSP CONTROLLERS
      TMP320LC2403APZS 制造商:TI 制造商全稱:Texas Instruments 功能描述:DSP CONTROLLERS