參數資料
型號： THNCFxxxBAI
廠商： Toshiba Corporation
英文描述： The THNCFxxxMBA/BAI series CompactFlash card is a flash technology based with ATA interface flash memory card.
中文描述： 在THNCFxxxMBA /白系列CF卡是閃存技術，ATA接口的閃存卡的。
文件頁數： 7/48頁
文件大小： 526K
代理商： THNCFXXXBAI
THNCFxxxMBA/BAI Series
2002-10-20 7/48
Preliminary
Signal Name
Dir
Pin No.
Description
GND
(PC Card Memory Mode)
GND
(PC Card I/O Mode)
GND
(True IDE Mode)
1,50
Ground
INPACK
(PC Card Memory Mode)
This signal is not used in this mode.
INPACK
(PC Card I/O Mode)
The Input Acknowledge signal is asserted by the CompactFlash
Storage Card when the card is selected and responding to an I/O
read cycle at the address that is on the address bus. This signal is
used by the host to control the enable of any input data buffers
between the CompactFlash Storage Card and the CPU.
INPACK
(True IDE Mode)
O
43
In True IDE Mode this output signal is not used and should not be
connected at the host.
IORD
(PC Card Memory Mode)
This signal is not used in this mode.
IORD
(PC Card I/O Mode)
This is an I/O Read strobe generated by the host. This signal gates
I/O data onto the bus from the CompcatFlash Storage Card when
the card is configured to use the I/O interface.
IORD
(True IDE Mode)
I
34
In True IDE Mode, this signal has same function as in PC Card I/O
Mode.
IOWR
(PC Card Memory Mode)
This signal is not used in this mode.
IOWR
(PC Card I/O Mode)
The I/O Write strobe pulse is used to clock I/O data on the Card
Data bus into the CompactFlash Storage Card controller registers
when the CompactFlash Storage Card is configured to use the I/O
interface.
The clocking will occur on the negative to positive edge of the
signal (trailing edge)
IOWR
(True IDE Mode)
I
35
In True IDE Mode, this signal has the same function as in PC Card
I/O Mode.
OE
(PC Card Memory Mode)
This is an Output Enable strobe generated by the host interface .It
is used to read data from the CompactFlash Storage Card in
Memory Mode and to read the CIS and configuration registers.
OE
(PC Card I/O Mode)
In PC Card I/O Mode, this signal is used to read the CIS and
configuration registers.
ATA SEL
(True IDE Mode)
I
9
To enable True IDE Mode this input should be grounded by the
host.
相關PDF資料
PDF描述
THNCF512MBAI The THNCFxxxMBA/BAI series CompactFlash card is a flash technology based with ATA interface flash memory card.
THNCF512MAA CompactFlash Card
THNCF512MBA The THNCFxxxMBA/BAI series CompactFlash card is a flash technology based with ATA interface flash memory card.
THNCF512MMA The THNCFxxxxMA series CompactFlash card is a flash technology based with ATA interface flash memory card
THNCF192MAA CompactFlash Card
相關代理商/技術參數
參數描述
THNCFXXXMAA 制造商:TOSHIBA 制造商全稱:Toshiba Semiconductor 功能描述:CompactFlash Card
THNCFXXXMBA 制造商:TOSHIBA 制造商全稱:Toshiba Semiconductor 功能描述:The THNCFxxxMBA/BAI series CompactFlash card is a flash technology based with ATA interface flash memory card.
THNCFXXXMMA 制造商:TOSHIBA 制造商全稱:Toshiba Semiconductor 功能描述:The THNCFxxxxMA series CompactFlash card is a flash technology based with ATA interface flash memory card
THNCFXXXXMA 制造商:TOSHIBA 制造商全稱:Toshiba Semiconductor 功能描述:The THNCFxxxxMA series CompactFlash card is a flash technology based with ATA interface flash memory card
THN-HS1 制造商:Traco Power 功能描述:HEATSINK THN 15/15WI/20/20WI 制造商:TRACOPOWER 功能描述:HEATSINK, THN 15/15WI/20/20WI 制造商:Traco Power 功能描述:HEATSINK, THN 15/15WI/20/20WI; For Use With:THN15, THN15WI, THN20, THN20WI; Accessory Type:Heatsink; SVHC:No SVHC (19-Dec-2012) ;RoHS Compliant: Yes 制造商:Traco Power 功能描述:Heatsink for Traco THN15,15WI,20,20WI
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*