
Ltp: tft028
______________________________________________________________________________________________________
VI TELEFILTER
Application note
______________________________________________________________________________________________________
Version 1.1
01.11.00
TFS 433 D
2/2
3. Matching on the PCB
The following matching elements have been used at the PCB:
L1
______________________________________________________________________________________________________
VI TELEFILTER
Potsdamer Strae 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
_______________________________________________________________________
_______________________________
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Vectron International, Inc.
267 Lowell Road
Hudson, NH 03051 / USA
Tel: (603) 598-0070 Fax: (603) 598-0075
E-Mail: vti@vtinh.com
SAW
1,2,3,6,7,8
5
10
L2
Output
50 Ohm
C2
Input
50 Ohm
C1
L1 = 39 nH
C1 = 0,5 pF
The C1,C2 capacitors are either 0,5 pF capacitors or an inline connection of two 1 pF capacitors. In
addition to that some 0
jumpers have been used.
The matching on the PCB does slightly differ from the theoretical matching. The reason for that are
parasitics of the PCB.
But if the parasitics on the customer board (mentioned parasitics, additional parasitics of active parts)
are different to this PCB the matching elements have to be slightly adjusted. Both in line and shunt
elements change both passband tilt and passband ripple. But
- the in line coils mainly influences the pass band tilt
- the shunt capacitors mainly influences the pass band ripple
an increase of the capacity value will decrease the passband ripple and will change a flat
characteristic to a round one
L2 = 39 nH
C2 = 0,5 pF