- 您現在的位置：買賣IC網 > PDF目錄365782 > TDA9815 (NXP SEMICONDUCTORS) Multistandard/MAC VIF-PLL with QSS-IF and dual FM-PLL/AM demodulator(帶QSS-IF和雙路FM-PLL/AM解調器的多標準/媒體存取控制 VIF-PLL) PDF資料下載
參數資料
| 型號： | TDA9815 |
| 廠商： | NXP SEMICONDUCTORS |
| 元件分類： | 接收器 |
| 英文描述： | Multistandard/MAC VIF-PLL with QSS-IF and dual FM-PLL/AM demodulator(帶QSS-IF和雙路FM-PLL/AM解調器的多標準/媒體存取控制 VIF-PLL) |
| 中文描述： | AM/FM, AUDIO/VIDEO DEMODULATOR, PDIP32 |
| 封裝： | 0.400 INCH, PLASTIC, SOT-232-1, SDIP-32 |
| 文件頁數： | 6/40頁 |
| 文件大?。?/td> | 265K |
| 代理商： | TDA9815 |
第1頁第2頁第3頁第4頁第5頁當前第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁第31頁第32頁第33頁第34頁第35頁第36頁第37頁第38頁第39頁第40頁
1998 Feb 11
6
Philips Semiconductors
Product specification
Multistandard/MAC VIF-PLL with QSS-IF
and dual FM-PLL/AM demodulator
TDA9815
FUNCTIONAL DESCRIPTION
The integrated circuit comprises the functional blocks as
shown in Fig.1:
Vision IF amplifier and input switch
Tuner and VIF-AGC
Frequency Phase Locked Loop detector (FPLL)
VCO, Travelling Wave Divider (TWD) and AFC
Video demodulator and amplifier
Video buffer
SIF amplifier and AGC
Single reference QSS mixer
AM demodulator
FM-PLL demodulator
Internal voltage stabilizer and
1
2
V
P
-reference.
Vision IF amplifier and input switch
The vision IF amplifier consists of three AC-coupled
differential amplifier stages. Each differential stage
comprises a feedback network controlled by emitter
degeneration. The first differential stage is extended by
two pairs of emitter followers to provide two IF input
channels. The VIF input can be selected by pin 30.
Tuner and VIF-AGC
The AGC capacitor voltage is transferred to an internal IF
control signal, and is fed to the tuner AGC to generate the
tuner AGC output current (open-collector output). The
tuner AGC takeover point can be adjusted. This allows the
tuner and the SAW filter to be matched to achieve the
optimum IF input level.
The AGC detector charges/discharges the AGC capacitor
to the required voltage for setting of VIF and tuner gain in
order to keep the video signal at a constant level.
Therefore for negative video modulation the sync level and
for positive video modulation the peak white level of the
video signal is detected. In order to reduce the reaction
time for positive (or MAC) modulation, where a very large
time constant is needed, an additional level detector
increases the discharging current of the AGC capacitor
(fast mode) in the event of a decreasing VIF amplitude
step. The additional level information is given by the
black level detector voltage.
Frequency Phase Locked Loop detector (FPLL)
The VIF-amplifier output signal is fed into a frequency
detector and into a phase detector via a limiting amplifier.
During acquisition the frequency detector produces a DC
current proportional to the frequency difference between
the input and the VCO signal. After frequency lock-in the
phase detector produces a DC current proportional to the
phase difference between the VCO and the input signal.
The DC current of either frequency detector or phase
detector is converted into a DC voltage via the loop filter,
which controls the VCO frequency. In the event of positive
modulated signals the phase detector is gated by
composite sync in order to avoid signal distortion for
overmodulated VIF signals.
VCO, Travelling Wave Divider (TWD) and AFC
The VCO operates with a resonance circuit (with L and C
in parallel) at double the PC frequency. The VCO is
controlled by two integrated variable capacitors. The
control voltage required to tune the VCO from its
free-running frequency to actually double the PC
frequency is generated by the frequency-phase detector
(FPLL) and fed via the loop filter to the first variable
capacitor. This control voltage is amplified and additionally
converted into a current which represents the AFC output
signal. The VCO centre frequency can be decreased
(required for L accent standard) by activating an additional
internal capacitor. This is achieved by using the L accent
switch. In this event the second variable capacitor can be
controlled by a variable resistor at the L accent switch for
setting the VCO centre frequency to the required L accent
value. At centre frequency the AFC output current is equal
to zero.
The oscillator signal is divided-by-two with a TWD which
generates two differential output signals with a 90 degree
phase difference independent of the frequency.
Video demodulator and amplifier
The video demodulator is realized by a multiplier which is
designed for low distortion and large bandwidth. The vision
IF input signal is multiplied with the ‘in phase’ signal of the
travelling wave divider output. In the demodulator stage
the video signal polarity can be switched in accordance
with the TV standard.
相關PDF資料 |
PDF描述 |
|---|---|
| TDA9817 | Single/Multistandard VIF/SIF-PLL and FM-PLL/AM demodulator(單一/多標準的VIF/SIF-PLL and FM-PLL/AM解調器) |
| TDA9818 | Single/Multistandard VIF/SIF-PLL and FM-PLL/AM demodulator(單一/多標準的VIF/SIF-PLL and FM-PLL/AM解調器) |
| TDA9818T | Single/multistandard VIF/SIF-PLL and FM-PLL/AM demodulators |
| TDA9817TS | Single/multistandard VIF/SIF-PLL and FM-PLL/AM demodulators |
| TDA9817T | Single/multistandard VIF/SIF-PLL and FM-PLL/AM demodulators |
相關代理商/技術參數 |
參數描述 |
|---|---|
| TDA9816M | 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Multistandard multimedia IF-PLL and FM radio demodulator |
| TDA9817 | 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Single/multistandard VIF/SIF-PLL and FM-PLL/AM demodulators |
| TDA9817T | 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Single/multistandard VIF/SIF-PLL and FM-PLL/AM demodulators |
| TDA9817TS | 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Single/multistandard VIF/SIF-PLL and FM-PLL/AM demodulators |
| TDA9818 | 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Single/multistandard VIF/SIF-PLL and FM-PLL/AM demodulators |
發布緊急采購，3分鐘左右您將得到回復。