參數資料
型號： TDA9614H
廠商： NXP SEMICONDUCTORS
元件分類： 消費家電
英文描述： Audio processor for VHS hi-fi and linear audio(應用于VHS高保真和線性音頻的音頻處理器)
中文描述： SPECIALTY CONSUMER CIRCUIT, PQFP64
封裝： PLASTIC, QFP-64
文件頁數： 9/60頁
文件大?。?/td> 570K
代理商： TDA9614H
1995 Mar 21
9
Philips Semiconductors
Preliminary specification
Audio processor for VHS hi-fi
and linear audio
TDA9614H
6.1
Audio I/O switching
6.1.1
I
NPUT
S
ELECT
(I
NPUT
S
EL
)
For the audio FM circuitry eight different audio signals can
be selected. The selection made here for hi-fi is also
available for the linear audio circuitry.
1.
TUNER (stereo input; internal tuner of VCR).
2.
CINCH (stereo input; connection to hi-fi set).
3.
EXT1 (stereo input; TV SCART1).
4.
EXT2 (stereo input; decoder, 2nd VCR SCART2).
5.
EXT3 (stereo input; front CINCH for e.g. camcorder).
6.
SAP (mono input; ‘Second Audio Program’ audio
carrier for NTSC or conventional FM carrier with
NICAM reception).
7.
NORMAL (linear audio; [playback] signal of linear
audio).
When inserting a new video signal in an old
audio/video recording the hi-fi audio track is erased.
This setting can keep the current audio available on
the hi-fi track by copying the (playback) linear audio
signal to the hi-fi track during video insert.
8.
EXT3/ST (input mix; mono EXT3 on left, mono hi-fi on
right channel).
For linear audio use see Section 6.1.2.
6.1.2
N
ORMAL
S
ELECT
(N
ORM
S
EL
)
For linear audio four settings can be selected:
1.
INPUTSEL (mono signal from input select).
This is the ‘standard’ setting. The signal source
selected with the input select is led to the linear audio
circuit. The linear audio AGC should be switched on.
2.
VOLUME (mono signal from [hi-fi] volume control).
The signal source selected with the input select has
now volume control, the linear audio AGC should be
switched off. This setting is for use with ‘a(chǎn)udio
dubbing’: inserting a new audio signal on the linear
track in an old audio/video recording. A special audio
dubbing feature is now possible by selecting ‘input mix’
EXT3/ST in the input select. This setting enables us to
use the VCR as a mixer console: an audio source
connected to EXT3 (front CINCH) can be adjusted and
mixed together with the original hi-fi playback signal,
using the left (EXT3) and right (hi-fi playback) volume
controls.
3.
SAP (SAP input).
This setting enables simultaneous recording of the
NTSC SAP signal on the linear track and TUNER
stereo on the audio FM track. When receiving a
NICAM audio signal, the linear audio can be used as a
‘backup’ track when received television signals are
weak.
TUNER LEFT (left channel [language 1] of TUNER
input).
When receiving dual language transmissions the main
language (language 1) can be recorded on linear
audio. Note that if the SAP input is not used it can be
connected to the right TUNER channel, enabling
language selection for linear audio.
4.
6.1.3
V
OLUME
L/R; AGC
The volume controls are mainly intended for level
adjusting of the audio signals to be recorded on the hi-fi
track, however using the ‘VOLUME’ setting in the Normal
Select it can also be used to control linear audio. The
volume controls have a control range of +14 dB to
49 dB
in 1 dB steps and a full mute. Because the volume controls
are I
2
C-bus controlled their actual behaviour is defined by
the VCR’s software. For instance user control can be
‘volume only’, ‘left + right’, ‘volume + balance’ or the
setting can be defined by a ‘digital AGC’ software loop
using the signals at the DC (VU meter) outputs.
The linear audio level can be controlled by an AGC circuit,
which can be switched off when desired. In most cases the
AGC should be used at all settings of the Normal Select
except for ‘VOLUME’.
6.1.4
A
UDIO
FM O
UTPUT
M
UTE
(AFOM
UTE
);
N
ORMAL
O
UTPUT
M
UTE
(NOM
UTE
)
The audio output signal of the audio FM circuit can be
muted with AFOMute, the linear output signal can be
muted using NOMute. If one of these signals is not used
as an output (or input) signal it is best muted to further
minimize crosstalk.
6.1.5
O
UTPUT
S
ELECT
(O
UT
S
EL
)
This block is the ‘main’ output select function, possibly
functional on all outputs. Each output however has some
means to override this selection for its own output signal,
to implement extra features. Eight selections are possible
and they are shown in Table 1.
相關PDF資料
PDF描述
TDA9615 DIODE,TVS,BI,20V,1500W,J-LEAD
TDA9615H Audio processor for VHS hi-fi(應用于VHS高保真的音頻處理器)
TDA9811 Multistandard VIF-PLL with QSS-IFand AM demodulator(帶QSS-IF和AM解調器的多標準的VIF-PLL)
TDA9812 Multistandard VIF-PLL andFM-PLL/AM demodulator(多標準的VIF-PLL 和FM-PLL/AM解調器)
TDA9812T Multistandard VIF-PLL and FM-PLL/AM demodulator
相關代理商/技術參數
參數描述
TDA9615 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Audio processor for VHS hi-fi
TDA9615H 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Audio processor for VHS hi-fi
TDA9725 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Y/C automatic adjustment processor VHS standard
TDA9800 制造商:NXP Semiconductors 功能描述:Video/TV Circuit, TV Video Receiver Circuit, 20 Pin, Plastic, DIP
TDA9800T 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:VIF-PLL demodulator and FM-PLL detector
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*