- 您現在的位置：買賣IC網 > PDF目錄371183 > TDA8925J (NXP SEMICONDUCTORS) Power stage 2 x 15 to 25Wclass-D audio amplifier PDF資料下載
參數資料
| 型號： | TDA8925J |
| 廠商： | NXP SEMICONDUCTORS |
| 元件分類： | 音頻／視頻放大 |
| 英文描述： | Power stage 2 x 15 to 25Wclass-D audio amplifier |
| 中文描述： | 20 W, 2 CHANNEL, AUDIO AMPLIFIER, PZFM17 |
| 封裝： | PLASTIC, SOT-243-3, DIL-BENT-SIL, 17 PIN |
| 文件頁數： | 21/23頁 |
| 文件大?。?/td> | 214K |
| 代理商： | TDA8925J |
2004 May 06
21
Philips Semiconductors
Product specification
Power stage 2 x 15 to 25 W class-D
audio amplifier
TDA8925
17 SOLDERING
17.1
Introduction to soldering through-hole mount
packages
This text gives a brief insight to wave, dip and manual
soldering.Amorein-depth account ofsoldering ICscanbe
found in our “Data Handbook IC26; Integrated Circuit
Packages”(document order number 9398 652 90011).
Wave soldering is the preferred method for mounting of
through-hole mount IC packages on a printed-circuit
board.
17.2
Soldering by dipping or by solder wave
Driven by legislation and environmental forces the
worldwide use of lead-free solder pastes is increasing.
Typical dwell time of the leads in the wave ranges from
3 to 4 seconds at 250
°
C or 265
°
C, depending on solder
material applied, SnPb or Pb-free respectively.
Thetotalcontacttimeofsuccessivesolderwavesmustnot
exceed 5 seconds.
The device may be mounted up to the seating plane, but
the temperature of the plastic body must not exceed the
specified maximum storage temperature (T
stg(max)
). If the
printed-circuit board has been pre-heated, forced cooling
may be necessary immediately after soldering to keep the
temperature within the permissible limit.
17.3
Manual soldering
Apply the soldering iron (24 V or less) to the lead(s) of the
package, either below the seating plane or not more than
2 mm above it. If the temperature of the soldering iron bit
is less than 300
°
C it may remain in contact for up to
10 seconds. If the bit temperature is between
300 and 400
°
C, contact may be up to 5 seconds.
17.4
Suitability of through-hole mount IC packages for dipping and wave soldering methods
Notes
1.
2.
For SDIP packages, the longitudinal axis must be parallel to the transport direction of the printed-circuit board.
For PMFP packages hot bar soldering or manual soldering is suitable.
PACKAGE
SOLDERING METHOD
DIPPING
WAVE
DBS, DIP, HDIP, RDBS, SDIP, SIL
PMFP
(2)
suitable
suitable
(1)
not suitable
相關PDF資料 |
PDF描述 |
|---|---|
| TDA8925ST | Power stage 2 x 15 to 25Wclass-D audio amplifier |
| TDA8939 | Zero dead time Class-D 7.5 A power comparator |
| TDA8939TH | Zero dead time Class-D 7.5 A power comparator |
| TDA9181 | Integrated multistandard comb filter |
| TDA9181P | ER 9C 7#16 2#12 PIN PLUG |
相關代理商/技術參數 |
參數描述 |
|---|---|
| TDA8925J/N1,112 | 功能描述:IC AMP AUDIO PWR 20W STER 17SIL RoHS:是 類別:集成電路 (IC) >> 線性 - 音頻放大器 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:2,500 系列:DirectDrive® 類型:H 類 輸出類型:耳機，2-通道（立體聲） 在某負載時最大輸出功率 x 通道數量:35mW x 2 @ 16 歐姆 電源電壓:1.62 V ~ 1.98 V 特點:I²C，麥克風，靜音，短路保護，音量控制 安裝類型:表面貼裝 供應商設備封裝:25-WLP（2.09x2.09） 封裝/外殼:25-WFBGA，WLCSP 包裝:帶卷 (TR) |
| TDA8925ST | 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Power stage 2 x 15 to 25Wclass-D audio amplifier |
| TDA8925ST/N1,112 | 功能描述:IC AMP AUDIO PWR 20W STER 17SIL RoHS:是 類別:集成電路 (IC) >> 線性 - 音頻放大器 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:2,500 系列:DirectDrive® 類型:H 類 輸出類型:耳機，2-通道（立體聲） 在某負載時最大輸出功率 x 通道數量:35mW x 2 @ 16 歐姆 電源電壓:1.62 V ~ 1.98 V 特點:I²C，麥克風，靜音，短路保護，音量控制 安裝類型:表面貼裝 供應商設備封裝:25-WLP（2.09x2.09） 封裝/外殼:25-WFBGA，WLCSP 包裝:帶卷 (TR) |
| TDA8926 | 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Power stage 2 x 50 W class-D audio amplifier |
| TDA8926J | 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Power stage 2 x 50 W class-D audio amplifier |
發布緊急采購，3分鐘左右您將得到回復。