參數資料
型號: TDA7513T
廠商: 意法半導體
英文描述: SINGLE-CHIP FM/AM TUNER WITH STEREO DECODER AND AUDIO PROCESSOR
中文描述: 單芯片F(xiàn)M /調幅調諧立體聲解碼器和音頻處理器
文件頁數: 17/59頁
文件大?。?/td> 520K
代理商: TDA7513T
17/59
TDA7513T
5
FUNCTIONAL DESCRIPTION
5.1 FM Section
5.1.1 Mixer1, AGC and 1st IF
Mixer1 is a wide dynamic range stage with low noise and large input signal performance. The mixer1 tank
center frequency can be adjusted by software (IF1T). The AGC operates on different sensitivities and
bandwidths (FMAGC) in order to improve the input sensitivity and dynamic range (keyed AGC). The output
signals of AGC are controlled voltage and current for preamplifier and prestage P-I-N diode attenuator
(see Figure 5). Two 10.7MHz amplifiers (IFG1 - fixed gain - and IFG2 - programmable) correct the IF ce-
ramic insertion loss.
5.1.2 Mixer2, Limiter and Demodulator
In this 2
nd
mixer stage the first 10.7MHz IF is converted into the second 450kHz IF. A multi-stage limiter
generates signals for the complete integrated demodulator without external tank. MPX output DC offset
compensation is possible via software.
5.1.3 Quality Detection and ISS (see Figure 3) Fieldstrength
Parallel to the mixer2 input a 10.7MHz limiter generates a signal for the digital IF counter and a field-
strength output signal. This internal unfiltered fieldstrength is used for adjacent channel and multipath de-
tection. The behaviour of this output signal can be corrected for DC offset (SL). The internally generated
unfiltered fieldstrength is filtered at pin #SMETERTC and used for softmute function, FM AGC keying and
generation of ISS filter switching signal for weak input level (sm).
5.1.4 Adjacent Channel Detector
The input of the adjacent channel detector is AC coupled to the internal unfiltered fieldstrength. A pro-
grammable and configurable highpass or bandpass filter (ACF) and amplifier (ACG) followed by a rectifier
measure the adjacent channel content. This voltage is compared with an adjustable threshold (ACWTH,
ACNTH) comparator (comparator1). The output signal of this comparator generates a DC level at PIN15
with a programmable time constant. Time constant control (TISS) for the adjacent channel is made by lin-
early charging and discharging an external capacitor following. The charge current is fixed and the dis-
charge current is controlled by I
2
C bus. This level produces digital signals (ac, ac+) after comparing by the
following comparator4. The adjacent channel information after filtering and rectification is available as an-
alog output on pin #TUNQUALITY (the gain can be selected via I
2
C bus) in combination with multipath
content information. It is possible to enable adjacent channel content information output only via I
2
C bus
control.
Symbol
Parameter
Test Condition
Min.
Typ.
Max.
Unit
A
Multipath Influence Factor
Addr. 12 / Bit 5+6
00
0.7
dB
01
0.85
dB
10
1
dB
11
1.15
dB
B
Noise Influence Factor
Addr. 16 / Bit 1+2
00
15
dB
01
12
dB
10
9
dB
11
6
dB
Table 27. Multipath And Quality Detectors
相關PDF資料
PDF描述
TDA7515 RF-FRONTEND FOR AM/FM-DSP-CARRADIOS WITH IF SAMPLING
TDA7518 MULTICHIP MODULE FOR CAR-RADIO APPLICATIONS
TDA7519TR MULTICHIP MODULE FOR CAR-RADIO APPLICATIONS
TDA7519 MULTICHIP MODULE FOR CAR-RADIO APPLICATIONS
TDA7521 Analog Front End(用于CD的模擬前端)
相關代理商/技術參數
參數描述
TDA7513T_07 制造商:STMICROELECTRONICS 制造商全稱:STMicroelectronics 功能描述:Single chip FM/AM tuner with stereo decoder and audio processor
TDA7514 制造商:STMICROELECTRONICS 制造商全稱:STMicroelectronics 功能描述:SINGLE-CHIP FM/AM TUNER WITH STEREO DECODER AND AUDIO PROCESSOR
TDA7515 功能描述:音頻 DSP RF Front End RoHS:否 制造商:Texas Instruments 工作電源電壓: 電源電流: 工作溫度范圍: 安裝風格: 封裝 / 箱體: 封裝:Tube
TDA7515_06 制造商:STMICROELECTRONICS 制造商全稱:STMicroelectronics 功能描述:RF front-end for AM/FM-DSP car radios with IF sampling
TDA7515A 制造商:STMicroelectronics 功能描述:TDA7515A - Trays