- 您現在的位置：買賣IC網 > PDF目錄365772 > TDA1023 (NXP SEMICONDUCTORS) Proportional-control triac triggering circuit PDF資料下載
參數資料
| 型號： | TDA1023 |
| 廠商： | NXP SEMICONDUCTORS |
| 元件分類： | 模擬信號調理 |
| 英文描述： | Proportional-control triac triggering circuit |
| 中文描述： | SPECIALTY ANALOG CIRCUIT, PDIP16 |
| 封裝： | 0.300 INCH, PLASTIC, DIP-16 |
| 文件頁數： | 4/19頁 |
| 文件大?。?/td> | 266K |
| 代理商： | TDA1023 |
May 1991
4
Philips Semiconductors
Product specification
Proportional-control triac triggering circuit
TDA1023/T
FUNCTIONAL DESCRIPTION
The TDA1023 generates pulses to trigger a triac. These
pulses coincide with the zero excursions of the mains
voltage, thus minimizing RF interference and mains supply
transients. In order to gate the load on and off, the trigger
pulses occur in bursts thus further reducing mains supply
pollution. The average power in the load is varied by
modifying the duration of the trigger pulse burst in
accordance with the voltage difference between the
control input CI and the reference input, either UR or BR.
Power supply: V
CC
, RX and V
z
(pins 14, 16 and 11)
The TDA1023 is supplied from the AC mains via a resistor
R
D
to the RX connection (pin 16); the V
EE
connection (pin
13) is linked to the neutral line (see Fig.4a). A smoothing
capacitor C
S
should be coupled between the V
CC
and V
EE
connections.
A rectifier diode is included between the RX and V
CC
connections whilst the DC supply voltage is limited by a
chain of stabilizer diodes between the RX and V
EE
connections (see Fig.3).
A stabilized reference voltage (V
Z
) is available at pin 11 to
power an external temperature sensing bridge.
Supply operation
During the positive mains half-cycles the current through
the external voltage dropping resistor R
D
charges the
external smoothing capacitor C
S
until RX attains the
stabilizing potential of the internal stabilizing diodes. R
D
should be selected to be capable of supplying the current
I
CC
for the TDA1023, the average output current I
3(AV)
,
recharge the smoothing capacitor C
S
and provide the
supply for an external temperature bridge. (see Figs 9 to
12). Any excess current is by-passed by the internal
stabilizer diodes. The maximum rated supply current,
however, must not be exceeded.
During the negative mains half-cycles external smoothing
capacitor C
S
supplies the sum of the current demand
described above. Its capacitance must be sufficiently high
to maintain the supply voltage above the specified
minimum.
Dissipation in resistor R
D
is halved by connecting a diode
in series (see Fig.4b and 9 to 12). A further reduction in
dissipation is possible by using a high quality dropping
capacitor C
D
in series with a resistor R
SD
(see Figs 4c and
14). Protection of the TDA1023 and the triac against
mains-borne transients can be provided by connecting a
suitable VDR across the mains input.
Control and reference inputs CI, BR and UR
(pins 6, 9 and 7)
For the control of room temperature (5
°
C to 30
°
C)
optimum performance is obtained by using the translation
circuit. The buffered reference input BR (pin 9) is used as
a reference input whilst the output reference buffer QR (pin
8) is connected to the unbuffered reference input UR
(pin 7). This ensures that the range of room temperature is
encompassed in most of the rotation of the potentiometer
to give a linear temperature scale with accurate setting.
Should the translation circuit not be required, the
unbuffered reference input UR (pin 7) is used as a
reference input. The buffered reference input BR (pin 9)
must then be connected to the reference supply output V
Z
(pin 11).
For proportional power control the unbuffered reference
input UR (pin 7) must be connected to the firing burst
repetition time control input TB (pin 12).The buffered
reference input BR (pin 9), which is in this instance
inactive, must then be connected to the reference supply
output V
Z
(pin 11).
Proportional range control input PR (pin 5)
The output duty factor changes from 0% to 100% by a
variation of 80 mV at the control input CI (pin 6) with the
proportional range control input PR open. For temperature
control this corresponds to a temperature difference of 1 K.
By connecting the proportional range control input PR
(pin 5) to ground the range may be increased to 400 mV,
i.e. 5 K. Intermediate values may be obtained by
connecting the PR input to ground via a resistor R5
(see Table 1).
Hysteresis control input HYS (pin 4)
With the hysteresis control input HYS (pin 4) open, the
device has a built-in hysteresis of 20 mV. For temperature
control this corresponds with 0.25 K.
Hysteresis is increased to 320 mV, corresponding to 4 K,
by grounding HYS (pin 4). Intermediate values are
obtained by connecting pin 4 via resistor R4 to ground.
Table 1 provides a set of values for R4 and R5 giving a
fixed ratio between hysteresis and proportional range.
相關PDF資料 |
PDF描述 |
|---|---|
| TDA1023T | Proportional-control triac triggering circuit |
| TDA1029 | Signal-sources switch |
| TDA1060 | CONTROL CIRCUIT FOR SMPS |
| TDA1060A | CONTROL CIRCUIT FOR SMPS |
| TDA1060B | CONTROL CIRCUIT FOR SMPS |
相關代理商/技術參數 |
參數描述 |
|---|---|
| TDA1023T | 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Proportional-control triac triggering circuit |
| TDA1024 | 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:A MAIN-ZERO TRIAC-TRIGGERING CIRCUIT |
| TDA1029 | 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Signal-sources switch |
| TDA1030 | 制造商:YOUDA 制造商全稱:Wuxi Youda electronics Co.,LTD 功能描述:TV SOUND POWER AMPLIFIER |
| TDA1035 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Tonkanaischaltung fur Fernsehempfanger |
發布緊急采購，3分鐘左右您將得到回復。