參數資料
型號： TC9446FG
元件分類： 消費家電
英文描述： SPECIALTY CONSUMER CIRCUIT, PQFP100
封裝： 14 X 20 MM, 0.65 MM PITCH, PLASTIC, QFP-100
文件頁數： 5/41頁
文件大?。?/td> 562K
代理商： TC9446FG
TC9446FG
2005-09-28
13
5)
Incorrect operation detection
Incorrect operation detection of the internal program of TC9446FG can be made to perform by
setting the incorrect operation detection start bit in a 24 bit command to “H”. As for this incorrect
operation detection start bit, the reversal output only of the case of MICS terminal = “H” is carried
out from MIACK terminal.
And, since this incorrect operation detection start bit is periodically cleared by “L” when an internal
program is operating normally, MIACK terminal at the time of MICS terminal = “H” is set to “H”
from “L”.
However, since it will stop being cleared if an internal program becomes a incorrect operation state,
as for MIACK terminal at the time of MICS terminal = “H”, the state of “L” will continue.
Thus incorrect operation detection of a program is attained by supervising MIACK terminal at the
time of MICS terminal = “H”. Moreover, although it checks that MIACK terminal is “L” after setting
MICS terminal to “L” in case a MCU starts access to TC9446FG, MCU can judge that an internal
program is a incorrect operation state, when the state of MIACK = “H” continues.
In addition, when a incorrect operation state is detected, it can return from a incorrect operation
state by initializing by transmitting the soft reset command which the reset terminal was set to “L” or
was mentioned above.
The procedure of incorrect operation detection is shown in Figure 6.
Figure 6
Procedure of Incorrect Operation Detection
MICS
= “L”
Checking of MIACK
= “L”
(waiting for becoming to MIACK
= “L” at the MIACK = “H”)
Transmission of 24 bit command
(starting the incorrect operation detection
= 000080h)
Program makes to clear the incorrect operation
detection bit
MIACK
= “H”
It starts the incorrect operation detection
by “1”.
MICS
= “H”
MIACK
= “L”
When not set to “L” with “H”, it is the state
of incorrect operation.
MIACK
= “L” is continue at incorrect
operation, as detection bit isn’t cleared.
相關PDF資料
PDF描述
TC9447F SPECIALTY CONSUMER CIRCUIT, PQFP100
TC9452F SPECIALTY CONSUMER CIRCUIT, PQFP44
TC9456F SPECIALTY CONSUMER CIRCUIT, PQFP44
TC9459F 2 CHANNEL(S), VOLUME CONTROL CIRCUIT, PDSO24
TC9459N 2 CHANNEL(S), VOLUME CONTROL CIRCUIT, PDIP28
相關代理商/技術參數
參數描述
TC9447F 制造商:TOSHIBA 制造商全稱:Toshiba Semiconductor 功能描述:Single-Chip Audio Digital Signal Processor
TC9452F 制造商:TOSHIBA 制造商全稱:Toshiba Semiconductor 功能描述:SINGLE CHIP SURROUND LSI
TC9455F 制造商:TOSHIBA 制造商全稱:Toshiba Semiconductor 功能描述:TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic
TC9455N 制造商:TOSHIBA 制造商全稱:Toshiba Semiconductor 功能描述:TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic
TC9456F 制造商:TOSHIBA 制造商全稱:Toshiba Semiconductor 功能描述:SINGLE CHIP SURROUND LSI WITH A BUILT-IN SRS
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*