
T6N71
2000-08-30
1/18
TOSHIBA CMOS Digital Integrated Circuit
Silicon Monolithic
T 6 N 7 1
RFID (Radio Frequency tag) Reader and Writer Interface LSI
Features
RFID reader and writer interface LSI embedding analog and
data processing
Receive signal demodulation circuit stabilized by a built-in
digital PLL. The antenna, capacitors, band pass filter, and
other features are external, therefore selectable.
Built-in modulation circuit for transmit carrier
Supports RFID LSI (TOSHIBA general-purpose T6N38/46/78).
Conforms to ISO14443 (type B) and ISO13506.
Supplied as bare chip or QFP44
Clock sync serial interface/start-stop sync serial interface for interfacing with CPU
Sync circuit (crossed line protection) in case of multiple readers in simultaneous operation
Transmit/receive control by register
Built-in oscillator circuit
Power supply voltage detection circuit for battery use
Weight: 384 mg (typ.)
TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general
can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the
buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and
to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or
damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the
most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling
Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc..
The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal
equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are
neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or
failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy
control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control
instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document
shall be made at the customer’s own risk.
The products described in this document are subject to the foreign exchange and foreign trade laws.
The products described in this document contain components made in the United States and subject to export control of the U.S.
authorities. Diversion contrary to the U.S. law is prohibited.
The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by
TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its
use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or
others.
The information contained herein is subject to change without notice.
000707EDA1