參數資料
型號： T6K11
廠商： Toshiba Corporation
英文描述： DOT MATRIX LCD DRIVER
中文描述： 點陣液晶驅動
文件頁數： 1/47頁
文件大?。?/td> 576K
代理商： T6K11
T6K11
2001-03-13 1/47
TOSHIBA CMOS DIGITAL INTEGRATED CIRCUIT SILICON MONOLITHIC
T6K11
DOT MATRIX LCD DRIVER
The T6K11 driver is designed for use in small to medium
sized
dot matrix LCD panels. This driver can be interfaced to the MPU
via a 4 / 8
bit (68 / 80
series) or a serial interface, and is
operated asynchronously with the MPU. Since the T6K11
contains an CR circuit clock driver, it can generate the timing
signals required for the LCD.
The display data can be stored in the built
in display RAM,
whose cells each correspond to each dot on the dot
matrix LCD.
The display data written to the RAM corresponds one for one to
the LCD drive signals output by the device. Since the T6K11 has
160 outputs for the LCD drive (segment) signals that constitute
display data and 65 outputs for the LCD drive (common) signals
that constitute scanning signals, this single device allows you to
drive an LCD panel comprised of up to 160 × 65 dots with a
minimum of power requirement.
To minimize its power consumption, the T6K11 has a display
change mode (power save mode) in which only a 160 × 1
dot icon can be displayed. What’s more, it has various
built
in analog circuits such as a D / A converter for the LCD drive power supply, a step
up circuit (×2 to ×5), and
a contrast control (electronic VR) circuit. All these circuits enable the LCD panel to be driven with a single power
supply.
This product is under development; hence, specifications may change without notice. When you use this product,
please refer to the latest technical datasheet.
TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general
can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the
buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and
to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or
damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the
most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling
Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc..
The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal
equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are
neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or
failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy
control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control
instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document
shall be made at the customer’s own risk.
Polyimide base film is hard and thin. Be careful not to injure yourself on the film or to scratch any other parts with the film. Try to
design and manufacture products so that there is no chance of users touching the film after assembly, or if they do , that there is no
chance of them injuring themselves. When cutting out the film, try to ensure that the film shavings do not cause accidents. After use,
treat the leftover film and reel spacers as industrial waste.
Light striking a semiconductor device generates electromotive force due to photoelectric effects. In some cases this can cause the
device to malfunction.
This is especially true for devices in which the surface (back), or side of the chip is exposed. When designing circuits, make sure
that devices are protected against incident light from external sources. Exposure to light both during regular operation and during
inspection must be taken into account.
The products described in this document are subject to the foreign exchange and foreign trade laws.
The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by
TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its
use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or
others.
The information contained herein is subject to change without notice.
000707EBE1
相關PDF資料
PDF描述
T6K41 Column and Row Driver LSI for a Dot Matrix Graphic LCD
T6L37A Source Driver for TFT LCD Panels
T7002 TELECOMMUNICATIONS PRODUCTS
T7006 TELECOMMUNICATIONS PRODUCTS
T7024 Bluetooth⑩/ISM 2.4-GHz Front- End IC
相關代理商/技術參數
參數描述
T6K14 制造商:TOSHIBA 制造商全稱:Toshiba Semiconductor 功能描述:COLUMN AND ROW DRIVER LSI FOR A DOT MATRIX GRAPHIC LCD
T6K145NS 制造商:TOSHIBA 制造商全稱:Toshiba Semiconductor 功能描述:COLUMN AND ROW DRIVER LSI FOR A DOT MATRIX GRAPHIC LCD
T6K14UBW 制造商:TOSHIBA 制造商全稱:Toshiba Semiconductor 功能描述:COLUMN AND ROW DRIVER LSI FOR A DOT MATRIX GRAPHIC LCD
T6K34 制造商:TOSHIBA 制造商全稱:Toshiba Semiconductor 功能描述:Row Driver LSI for Dot Matrix Graphic LCD
T6K41 制造商:TOSHIBA 制造商全稱:Toshiba Semiconductor 功能描述:Column and Row Driver LSI for a Dot Matrix Graphic LCD
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*