- 您現在的位置：買賣IC網 > PDF目錄11095 > SY87724LHI (Micrel Inc)IC MUX/DEMUX 3X1 80TQFP PDF資料下載
參數資料
| 型號： | SY87724LHI |
| 廠商： | Micrel Inc |
| 文件頁數： | 9/10頁 |
| 文件大?。?/td> | 0K |
| 描述： | IC MUX/DEMUX 3X1 80TQFP |
| 標準包裝： | 90 |
| 系列： | AnyRate® |
| 功能： | 多路復用器/多路分解器 |
| 電路： | 1 x 3:1 |
| 電壓電源： | 雙電源 |
| 電壓 - 電源，單路/雙路(±)： | ±3.15 V ~ 3.45 V |
| 電流 - 電源： | 650mA |
| 工作溫度： | -40°C ~ 85°C |
| 安裝類型： | 表面貼裝 |
| 封裝/外殼： | 80-TQFP 裸露焊盤 |
| 供應商設備封裝： | 80-EPAD-TQFP（14x14） |
| 包裝： | 托盤 |
Micrel, Inc.
SY87724L
March 2008
8
M9999-032608-B
hbwhelp@micrel.com or (408) 955-1690
Wide MUX
The more typical case will be to convert 8 or 10 bit wide
parallel data words into a serial bit stream. Because the
worst case parallel input rate is on the order of 250 to 340
Mega-transfers per second, single-ended parallel inputs
are used.
This scenario is much like the narrow MUX case, except
now MPINCK+ clocks slower, for 8- or 10-bit parallel
words.
Figure 4. Wide MUX
Note that the input data indication is now single ended,
and that completely different input pins are used, as
compared to the 4 or 5 bit case.
The following table summarizes the available bit widths.
The right column shows the parallel input bits, such as
they will appear in the serial output stream.
Width
Sequence
4
MPF0±, MPF1±, MPF2±, MPF3±
5
MPF0±, MPF1±, MPF2±, MPF3±, MPF4±
8
MP5, MP6, MP7, MP8, MP0, MP1, MP2, MP3
10
MP5, MP6, MP7, MP8, MP9, MP0, MP1, MP2, MP3,
MP4
Table 4. Output Pins for Different Width MUX
Loopback
To ease system design, the SY87724L MDM has the
capability to loop parallel data in, through the MUX, into
the demux, and back to parallel data out. This permits
system check-out through to the individual MDM device.
Note that, for a full check-out, some form of loopback
further down the serial stream is required.
Loopback is incorporated into MDM by modifying the serial
clock, data, and sync inputs to the demux stage.
During loopback, the source of serial information for the
demux
is
changed.
The
MSOUT±,
MTXCLK±
and
MSYNOUT± are internally muxed to the DSIN±, DCKIN±,
and
DFMIN±
nodes
of
the
demux
section.
The
MSYNOUT± signal has the same characteristics as the
DFMIN logic expects.
This exercises the internal data path, both MUX and
demux, for MDM, and also the control logic. The parallel
data presented to the parallel inputs will appear, some
small but unspecified time later, at the parallel outputs.
Figure 5. Loopback Function
相關PDF資料 |
PDF描述 |
|---|---|
| SY58040UMG TR | IC CROSSPOINT SWITCH 4X4 44MLF |
| C8051F045-GQR | IC 8051 MCU 64K FLASH 64TQFP |
| SY55858UHI TR | IC CROSSPOINT SWITCH DUAL 32TQFP |
| SY55858UHC | IC CROSSPOINT SWITCH DUAL 32TQFP |
| EFM32GG890F512 | IC MCU 32BIT 512KB FLASH BGA112 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| SY87724LHY | 功能描述:IC MUX/DEMUX 3X1 80LQFP RoHS:是 類別:集成電路 (IC) >> 接口 - 模擬開關，多路復用器，多路分解器 系列:AnyRate® 標準包裝:48 系列:- 功能:開關 電路:4 x SPST - NO 導通狀態電阻:100 歐姆 電壓電源:單/雙電源 電壓 - 電源，單路/雙路(±):2 V ~ 12 V，±2 V ~ 6 V 電流 - 電源:50nA 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:16-SOIC（0.154"，3.90mm 寬） 供應商設備封裝:16-SOIC 包裝:管件 |
| SY87725L | 制造商:MICREL 制造商全稱:Micrel Semiconductor 功能描述:2.5Gbps GPON/BPON ONU SERDES |
| SY87725L_11 | 制造商:MICREL 制造商全稱:Micrel Semiconductor 功能描述:2.5Gbps GPON/BPON ONU SERDES |
| SY87725LHY | 功能描述:計時器和支持產品 3.3V ONU SERDES (I Temp, Lead Free/60 pin EP-TQFP) RoHS:否 制造商:Micrel 類型:Standard 封裝 / 箱體:SOT-23 內部定時器數量:1 電源電壓-最大:18 V 電源電壓-最小:2.7 V 最大功率耗散: 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝:Reel |
| SY87725LHY TR | 功能描述:計時器和支持產品 3.3V ONU SERDES (I Temp, Lead Free/60 pin EP-TQFP/T+R) RoHS:否 制造商:Micrel 類型:Standard 封裝 / 箱體:SOT-23 內部定時器數量:1 電源電壓-最大:18 V 電源電壓-最小:2.7 V 最大功率耗散: 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝:Reel |
發布緊急采購，3分鐘左右您將得到回復。