
Displays,
Hitachi, Ltd.
Sh.
No.
Page
Date
3284PS 2705 - SX21V001-Z4A - 3
June 10, '99
5-3/3
5. 3 ELECTRICAL CHARACTERISTICS OF BACKLIGHT
ITEM
(Note 1) Please design your lamp driving circuit (inverter) according to the above specifications,
and inform Hitachi of it.
(Note 2) Starting discharge voltage is increased w hen LCM is operating at lower temperature.
Please check the characteristics of your inverter before applying to your set.
(Note 3) Average life time of CFL w ill be decreased w hen LCM is operating at lower temperature.
(Note 4) Under low er driving frequency of an inverter, a certain backlight system (CFL & CFL
reflection sheet) may generate a sound noise. Before designing the inverter, please
consider the driving frequency and the noise.
(Note 5) Under low er temperature, please check CFL characteristics on your inverter.
(Note 6)
Lamp Voltage
Frequency
Lamp Current (1Lamp) (Note6)
Starting discharge Voltage
SYMBOL
VL
fL
IL
VS
(Note 2)
MIN
-
-
(1.2)
(Note 2)
(1400)
TYP
(500)
(60)
-
(1.8)
MAX
-
-
(2.5)
(Note 2)
-
UNIT
Vrms
kHz
Vrms
mA
NOTE
Ta=25°C
Ta=25°C
Ta=5°C
GND
INV
H.V
A
Note 1 : Test Methode and Conditions
The difference ("e") between the theoretical output voltage and the actual output voltage when
pressure is applied to any point within the valid area must be as indicated below .
e < applied voltage
×
0.03 (=
±
0.015)
Ag electrode
Resistor
Ag electrode
XL
X
Valid area
E
rB
rA
rA, rB = Resistance of Pattern
Ea
Eb
e
XL min
XL max
Valid area
E(v)
Dashed line :
Theoretically
correct voltage
Solid line :
Output voltage
(same Y line)