
353/426
CONTROLLER AREA NETWORK (bxCAN)
CONTROLLER AREA NETWORK
(Cont’d)
CAN FILTER CONFIGURATION REG.2 (CFCR2)
All bits of this register are set and cleared by soft-
ware.
Read / Write
Reset Value: 0000 0000 (00h)
Note
: To modify FFAx and FSCx bits bxCAN must
be in INIT mode.
Bit 7 =
FFA5
Filter FIFO Assignment for Filter 5
The message passing through this filter will be
stored in the specified FIFO.
0: Filter assigned to FIFO 0
1: Filter assigned to FIFO 1
Bit 6:5 =
FSC5[1:0]
Filter Scale Configuration
These bits define the scale configuration of Filter
5.
Bit 4 =
FACT5
Filter Active
The software sets this bit to activate Filter 5. To
modify the filter 5 registers (CF5R[7:0]), the
FACT5 bit must be cleared.
0: Filter 5 is not active
1: Filter 5 is active
Bit 3 =
FFA4
Filter FIFO Assignment for Filter 4
The message passing through this filter will be
stored in the specified FIFO.
0: Filter assigned to FIFO 0
1: Filter assigned to FIFO 1
Bit 2:1 =
FSC4[1:0]
Filter Scale Configuration
These bits define the scale configuration of Filter
4.
Bit 0 =
FACT4
Filter Active
The software sets this bit to activate filter 4. To
modify the Filter 4 registers (CF4R[7:0]), the
FACT4 bit must be cleared).
0: Filter 4 is not active
1: Filter 4 is active
CAN FILTER CONFIGURATION REG.3 (CFCR3)
All bits of this register are set and cleared by soft-
ware.
Read / Write
Reset Value: 0000 0000 (00h)
Bit 7 =
FFA7
Filter FIFO Assignment for Filter 7
The message passing through this filter will be
stored in the specified FIFO.
0: Filter assigned to FIFO 0
1: Filter assigned to FIFO 1
Bit 6:5 =
FSC7[1:0]
Filter Scale Configuration
These bits define the scale configuration of Filter
7.
Bit 4 =
FACT7
Filter Active
The software sets this bit to activate Filter 7. To
modify the Filter 7 registers (CF7R[7:0]), the
FACT7 bit must be cleared.
0: Filter 7 is not active.
1: Filter 7 is active.
Bit 3 =
FFA6
Filter FIFO Assignment for Filter 6
This bit allows the software to define whether the
message passing through this filter will be as-
signed to the receive FIFO0 or FIFO1.
0: Filter assigned to FIFO 0
1: Filter assigned to FIFO 1
Bit 2:1 =
FSC6[1:0]
Filter Scale Configuration
These bits define the scale configuration of Filter
6.
Bit 0 =
FACT6
Filter Active
The software sets this bit to activate Filter 6. To
modify the Filter 6 registers (CF6R[7:0]), the
FACT6 bit must be cleared.
0: Filter 6 is not active
1: Filter 6 is active
7
0
FFA5
FSC51 FSC50 FACT5 FFA4
FSC41 FSC40 FACT4
7
0
FFA7
FSC71 FSC70 FACT7 FFA6
FSC61 FSC60 FACT6
9