
1/7
ST20190
June 2004
This is preliminary information on a new product now in development. Details are subject to change without notice.
1
■
Low end and high end ADSL Bridge and Router
solutions
■
ADSL Modems / routers for residential and
SOHO broadband access to www and
corporate VPNs
■
Integrated Access Devices offering VoDSL or
VoIP applications
■
Home gateway solutions
APPLICATIONS
2
■
High Integration
– 2 chips, Line to ATM
– Direct ATM Interface
– Line Driver integrated
– Highly reduced bill of material cost
■
Support for multiple ADSL standards:
– ANSI T1.413 Issue2
– ITU G.992.1 (G.dmt)
– Annex A, Annex B, Annex C
– ITU G.992.2 (G.Lite)
– ITU G.992.3 (ADSL2)
– Annex A, B, C, I, J and L
– ITU G.992.4 (G.Lite bis)
– ITU G.992.5 (ADSL2+)
– Annex A, B, C, I, J and L
– Support of ReachDSLTM with digital com-
panion chip
■
Cat II functionality: Trellis coding and echo
cancellation
■
Dual latency support: fast + interleaved
■
Small footprint packages allow high density
board designs
■
Embedded controller with cache for powerful
and flexible on chip control of the modem
operation
FEATURES
■
Complete modem package
– No dependency on external processor and
easy,straight forward integration with external
network processors
– Full reference design kit for modem manufac-
turers, including schematics, layout, BoM,
HW design guide, firmware
■
Highest Performance
– Fully rate-adaptive
– ADSL mode > 12 Mbps in Downstream and >
1 Mbps in Upstream
– ADSL+ mode > 20 Mbps in Downstream and
> 2 Mbps in Upstream when using 64 tones
(annex L)
3
The ST20190 is a new generation ADSL chipset
from STMicroelectronics. It is highly integrated
and has the flexibility to offer all standards, all an-
nexes while being fully optimised for CPE applica-
tions. It provides all the required functions to
implement a complete Utopia rate adaptive DMT
ADSL modem. It consists of the optimised ADSL
Analogue Front-End chip ST20184 and the digital
chip ST20196 which includes a DMT/ATM mo-
dem, and a dedicated ADSL Transceiver Control-
ler with associated Firmware.
As shown in Fig.2, the chipset interfaces have
been defined to allow direct integration into sys-
tems design, reducing both time-to-market and im-
OVERALL DESCRIPTION
DATA BRIEF
ADSL, ADSL2 and ADSL+
Modem Chipset for CPE Applications with Utopia II Interface
REV. 1
Figure 1. Package
Table 1. Order Codes
Part Number
ST20184
ST20196
Package
TQFP100
LBGA208
TQFP100
LBGA208