SaRonix
Voltage Controlled Crystal Oscillator
Technical Data
SaRonix
3V, 5V HCMOS
141 Jefferson Drive Menlo Park, CA 94025 USA 650-470-7700 800-227-8974 Fax 650-462-9894
DS-162 REV C
5.2.1
S1310 / 1510 Series
Frequency Range:
ACTUAL SIZE
Description
A voltage controlled crystal oscillator
with a wide range of performance op-
tions available up to 120 MHz. This
economic part is designed for phase-
locked loop circuits commonly encoun-
tered in telecom, LAN and wireless data,
and in video processing applications.
The HCMOS output can drive both high
speed CMOS and TTL loads. The de-
vices are packaged in either standard 14-
pin or 8-pin DIP compatible all metal,
resistance welded packages for com-
mercial or industrial temperature range
applications.
32 MHz to 120 MHz
Frequency Stability:
±25 or ±50 ppm over all conditions: operating temperature,
voltage change, load change, calibration tolerance, aging,
with V
C
= 2.5V @ 5V, VC = 1.65V @ 3.3V
Output Waveform
Applications & Features
Wide frequency range up to 120 MHz
HCMOS compatible
Available in full and half size standard
DIP packages
Tri-state version available in full size
package
CMOS
T
r
T
f
V
DD
GND
0 Level
20% V
DD
50% V
DD
80% V
DD
1 Level
SYMMETRY
Temperature Range:
Operating:
Storage:
0 to +70°C, -40 to +85°C
-55 to +125°C
Supply Voltage:
Recommended Operating:
+5 V ±5% or 3.3V ±10%
Supply Current:
32 to 70 MHz:
70+
to 120 MHz:
50mA max, 35mA max @ 3.3V
65mA max, 35mA max @ 3.3V
Output Drive:
Symmetry:
Rise & Fall Times:
Logic 0:
Logic 1:
Load:
Jitter:
1310: 45/55% max @ 50% V
DD
for 0 to 70°C,
40/60% max @ 50% V
DD
for -40 to +85°C
1510: 45/55 % max @ 50% V
DD,
40/60% max @ 1.4V level
4ns max: 20% to 80% V
DD
1.5ns max: 0.5V to 2.5V, @ 5V TTL only
0.5V max, @ 3V: 20% V
DD
max
2.5V min, @ 3V: 80% V
DD
min
5TTL or 50pF 32 to 50 MHz
5TTL or 30pF 50+ to 120 MHz
@ 3V: 30pF up to 80 MHz, 95
AC up to 120 MHz
25ps max RMS period jitter
MIL-STD-883, Method 2002, Condition B
MIL-STD-883, Method 2003
MIL-STD-202, Method 211, Conditions A and C
MIL-STD-883, Method 2007, Condition A
MIL-STD-202, Method 215
MIL-STD-202, Method 210, Condition A, B or C
Mechanical:
Shock:
Solderability:
Terminal Strength:
Vibration:
Solvent Resistance:
Resistance to Soldering Heat:
Environmental:
MIL-STD-883, Method 1014, Condition C
MIL-STD-883, Method 1014, Condition A2
<5 x 10
-8
ATM cc/sec
MIL-STD-883, Method 1011, Condition A
MIL-STD-883, Method 1004
Gross Leak Test:
Fine Leak Test:
Thermal Shock:
Moisture Resistance:
Pull Characteristics:
Input Impedance:
Frequency Response (-3dB):
Pullability:
Control Voltage:
Transfer Function:
Linearity:
Center Control Voltage:
50K
min
20 kHz min
±25, ±50, ±75, ±100 ppm APR* (See Part Numbering Guide)
0.5 to 4.5 V or 0.3 to 3.0V
Frequency increases when Control Voltage increases
5% or 10% max
2.5V @ 5V, 1.65V @ 3.3V
* APR = (VCXO Pull relative to specified Output Frequency)
–
(VCXO Frequency Stability)