- 您現在的位置：買賣IC網 > PDF目錄365695 > SST31LF041A-300-4E-WI (Silicon Storage Technology, Inc.) 4 Mbit Flash + 1 Mbit or 256 Kbit SRAM ComboMemory PDF資料下載
參數資料
| 型號： | SST31LF041A-300-4E-WI |
| 廠商： | Silicon Storage Technology, Inc. |
| 元件分類： | 組合存儲器 |
| 英文描述： | 4 Mbit Flash + 1 Mbit or 256 Kbit SRAM ComboMemory |
| 中文描述： | 4 Mbit閃存1兆位或256千位的SRAM ComboMemory |
| 文件頁數： | 1/24頁 |
| 文件大小： | 294K |
| 代理商： | SST31LF041A-300-4E-WI |
2001 Silicon Storage Technology, Inc.
S71137-03-000
10/01
1
392
The SST logo and SuperFlash are registered trademarks of Silicon Storage Technology, Inc.
ComboMemory are trademarks of Silicon Storage Technology, Inc.
These specifications are subject to change without notice.
Data Sheet
FEATURES:
Monolithic Flash + SRAM ComboMemory
– SST31LF021/021E: 256K x8 Flash + 128K x8 SRAM
Single 3.0-3.6V Read and Write Operations
Concurrent Operation
– Read from or Write to SRAM while
Erase/Program Flash
Superior Reliability
– Endurance: 100,000 Cycles (typical)
– Greater than 100 years Data Retention
Low Power Consumption:
– Active Current: 10 mA (typical) for Flash and
20 mA (typical) for SRAM Read
– Standby Current: 10 μA (typical)
Flash Sector-Erase Capability
– Uniform 4 KByte sectors
Latched Address and Data for Flash
Fast Read Access Times:
– SST31LF021
Flash: 70 ns
SRAM: 70 ns
Flash: 300 ns
SRAM: 300 ns
– SST31LF021E
Flash Fast Erase and Byte-Program:
– Sector-Erase Time: 18 ms (typical)
– Bank-Erase Time: 70 ms (typical)
– Byte-Program Time: 14 μs (typical)
– Bank Rewrite Time: 4 seconds (typical)
Flash Automatic Erase and Program Timing
– Internal V
PP
Generation
Flash End-of-Write Detection
– Toggle Bit
– Data# Polling
CMOS I/O Compatibility
JEDEC Standard Command Set
Package Available
– 32-lead TSOP (8mm x 14mm)
PRODUCT DESCRIPTION
The SST31LF021/021E devices are a 256K x8 CMOS
flash memory bank combined with a 128K x8 or 32K x8
CMOS SRAM memory bank manufactured with SST’s
proprietary, high performance SuperFlash technology. Two
pinout standards are available for these devices. The
SST31LF021 conform to JEDEC standard flash pinouts
and the SST31LF021E conforms to standard EPROM
pinouts. The SST31LF021/021E devices write (SRAM or
flash) with a 3.0-3.6V power supply. The monolithic
SST31LF021/021E devices conform to Software Data
Protect (SDP) commands for x8 EEPROMs.
Featuring high performance Byte-Program, the flash
memory bank provides a maximum Byte-Program time of
20 μsec. The entire flash memory bank can be erased and
programmed byte-by-byte in typically 4 seconds, when
using interface features such as Toggle Bit or Data# Poll-
ing to indicate the completion of Program operation. To
protect against inadvertent flash write, the SST31LF021/
021E devices have on-chip hardware and Software Data
Protection schemes. Designed, manufactured, and tested
for a wide spectrum of applications, the SST31LF021/
021E devices are offered with a guaranteed endurance of
10,000 cycles. Data retention is rated at greater than 100
years.
The SST31LF021/021E operate as two independent mem-
ory banks with respective bank enable signals. The SRAM
and flash memory banks are superimposed in the same
memory address space. Both memory banks share com-
mon address lines, data lines, WE# and OE#. The memory
bank selection is done by memory bank enable signals.
The SRAM bank enable signal, BES# selects the SRAM
bank and the flash memory bank enable signal, BEF#
selects the flash memory bank. The WE# signal has to be
used with Software Data Protection (SDP) command
sequence when controlling the Erase and Program opera-
tions in the flash memory bank. The SDP command
sequence protects the data stored in the flash memory
bank from accidental alteration.
The SST31LF021/021E provide the added functionality of
being able to simultaneously read from or write to the
SRAM bank while erasing or programming in the flash
memory bank. The SRAM memory bank can be read or
written while the flash memory bank performs Sector-
Erase, Bank-Erase, or Byte-Program concurrently. All flash
memory Erase and Program operations will automatically
latch the input address and data signals and complete the
operation in background without further input stimulus
2 Mbit Flash + 1 Mbit SRAM ComboMemory
SST31LF021 / SST31LF021E
SST31LF021 / 021E2 Mb Flash (x8) + 1 Mb SRAM (x8) Monolithic ComboMemories
相關PDF資料 |
PDF描述 |
|---|---|
| SST31LF041A-70-4C-WH | 4 Mbit Flash + 1 Mbit or 256 Kbit SRAM ComboMemory |
| SST31LF041A-70-4C-WI | 4 Mbit Flash + 1 Mbit or 256 Kbit SRAM ComboMemory |
| SST31LF041A-70-4E-WH | 4 Mbit Flash + 1 Mbit or 256 Kbit SRAM ComboMemory |
| SST31LF043A-300-4C-WH | 4 Mbit Flash + 1 Mbit or 256 Kbit SRAM ComboMemory |
| SST31LF043A-300-4C-WI | 4 Mbit Flash + 1 Mbit or 256 Kbit SRAM ComboMemory |
相關代理商/技術參數 |
參數描述 |
|---|---|
| SST31LF041A-70-4C-WH | 制造商:SST 制造商全稱:Silicon Storage Technology, Inc 功能描述:4 Mbit Flash + 1 Mbit or 256 Kbit SRAM ComboMemory |
| SST31LF041A-70-4C-WI | 制造商:SST 制造商全稱:Silicon Storage Technology, Inc 功能描述:4 Mbit Flash + 1 Mbit or 256 Kbit SRAM ComboMemory |
| SST31LF041A-70-4E-WH | 制造商:SST 制造商全稱:Silicon Storage Technology, Inc 功能描述:4 Mbit Flash + 1 Mbit or 256 Kbit SRAM ComboMemory |
| SST31LF041A-70-4E-WI | 制造商:SST 制造商全稱:Silicon Storage Technology, Inc 功能描述:4 Mbit Flash + 1 Mbit or 256 Kbit SRAM ComboMemory |
| SST31LF043 | 制造商:SST 制造商全稱:Silicon Storage Technology, Inc 功能描述:4 Mbit Flash + 1 Mbit or 256 Kbit SRAM ComboMemory |
發布緊急采購，3分鐘左右您將得到回復。