參數資料
型號: SP4446KEB
英文描述: Evaluation Board Manual
中文描述: 評估板手冊
文件頁數: 2/4頁
文件大?。?/td> 104K
代理商: SP4446KEB
2
USING THE EVALUATION BOARD
1) Powering Up the SP4446 Circuit
The SP4446 Evaluation Board
can be powered from inputs from a +1.2V to +7.0V. Connect
with short leads directly to the “Vin” and “Gnd” posts. Monitor the Output Voltage and connect
the Load between the “Vout” post and the 2
nd
“GND” post.
2) Using the J1 Jumper: Enabling the SP4446 Output and using the Shutdown Mode
The SP4446 output will be Enabled if the J1 Jumper is in the top or pin 1 to 2 position. If J1 is
in the pin 2 to 3 position, the Shutdown pin is brought to GND, which puts the SP4446 in the low
quiescent Shutdown Mode.
3) Selecting the Inductor
In selecting an inductor, the saturation current specified for the inductor needs to be greater
then the SP4446 peak current to avoid saturating the inductor, which would result in a loss in
efficiency and could damage the inductor. The SP4446 evaluation board uses a Murata 10uH
inductor with an Isat value of 450mA and a DCR of 0.39ohms, which easily handles the Ipeak of
350mA of the SP4446 and will deliver high efficiencies. Other inductors could be selected
provided their Isat is greater than the Ipeak of the SP4446.
POWER SUPPLY DATA
相關PDF資料
PDF描述
SP4446 High Output Voltage Boost Regulator LCD Bias Regulator
SP4446EK High Output Voltage Boost Regulator LCD Bias Regulator
SP4480 Dual Electroluminscent Lamp Driver
SP4480EN Dual Electroluminscent Lamp Driver
SP4480EY Dual Electroluminscent Lamp Driver
相關代理商/技術參數
參數描述
SP44-50R00JSPECPPM 制造商:SC INC 功能描述: 制造商:SHALLCROSS INC 功能描述:
SP446 制造商:SIPAT 制造商全稱:SIPAT 功能描述:BB Filters
SP44-6 制造商:SIPAT 制造商全稱:SIPAT 功能描述:44MHz SAW Filter 6MHz Bandwidth
SP4479 制造商:Texas Instruments 功能描述:4479
SP44-8 制造商:SIPAT 制造商全稱:SIPAT 功能描述:SAW Filter Electrical Characteristic