
Item (Qty)
Order Code
Multivoltage Insulation & Continuity Testers . . .BM80/2
(no 1000 V range) . . . . . . . . . . . . . . . . . . . . . . . . . .BM81/2
(no continuity range) . . . . . . . . . . . . . . . . . . . . . . .BM82/2
Included Accessories
Test lead set . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6220-437
Test & carry case . . . . . . . . . . . . . . . . . . . . . . . . .6420-112
Optional Accessories . . . . . . . . . . . .Order Code
Fixed prod. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5210-350
Fused lead set FPK8 . . . . . . . . . . . . . . . . . . . . . . .6110-920
SP1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6220-606
MCC10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6111-290
DLB2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6220-602
Test record card (5 supplied) . . . . . . . . . . . . . . .6172-111
ACCESSORIES
ORDERING INFORMATION
The
connect to the instrument test leads
and enable direct indication of a.c.
current to be displayed on the 50,0 V
measuring range. Measurement in the
range of 1,0 A to 10,0 A a.c. can be
made, with overload up to 16 A at
marginally reduced accuracy, and the
clamp will span a conductor of 15mm.
This current measuring feature, not
normally associated with insulation
testers, greatly enhances the product
versatility and further increases the
applications for Electrical Contractors,
Utilities and Service Organisations.
MCC10
Current
Clamp
will
SPECIFICATION
Current Range:- 1,0 A to 10 Amp a.c. R.M.S.
Output Voltage:- 1 V a.c. per 1 A a.c.
Accuracy:- ±2%
Operating Temperature:
-10°C to +50°C<75% RH
Storage Temperature:- -20°C to +75°C
Type of Sensing:- Induction coil for a.c.
current
Max. Output Impedance:- 75
E.M.C. The unit meets EN50081-1 and
EN50082-1 (1992)
Max. Conductor Size:- 15 mm dia. cable,
or a 15 mm x 17 mm busbar.
Size (without leads):-
43 mm x 23 mm x 94 mm
(1,09 in x 50,8 in x 2,3 in approx.)
Weight:- 105 g
Available as an optional accessory is
the SP1 switched probe. By simply
plugging the standard red positive
lead into the instrument, and with the
switched test probe inserted into a
unique socket on the top of the
insulation tester, tests can be made by
pressing the remote switch on the
probe.
This remote operation significantly
increases the ease of use of the
product and reduces the time taken to
perform a test.
SPECIFICATION
Operating Temperature Range:-
-20°C to +40°C
Operating Humidity:-
90% RH @ 40°C max.
.Storage Temperature Range:-
-25°C to +65°C
Protection:- IP54
Safety:- Meets the safety require-
ments for double insulation to
IEC1010-2-31 (1995), EN61010-2-31 (1995),
IEC1010-1(1992), EN61010-1(1993),
Category III, 300 V phase to earth and
500 V phase to phase.
Weight:- 155 gm
The
communication interface provides an
RS232 serial data output simultaneous
to the displayed readings.
DLB2
optional
accessory
When used in conjunction with the
AVODATA software provided and an
IBM
compatible
insulation monitoring and data storage
are possible.
PC,
long
term
AVODATA also enables test data to be
presented
in
tabular
facilitates the printing of certificates.
form
and
SPECIFICATION
Baud Rate:- 9600
Operating Range:- -20°C to +40°C
Operating Humidity:-
90% RH @ 40°C max.
Storage Temperature Range:-
-25°C to +65°C
Safety:- Meets the safety
requirements for double insulation to
IEC1010-1(1992) EN61010-1(1993) to
Cat. III, 300 V phase to earth (ground)
and 500 V phase to phase.
E.M.C.
Meets EN50081-1 and
EN50082-1 (1992)
Dimensions:- 94 mm x 46 mm x 42 mm
(2,3 in x 1,1 in x 1, 06 in approx.)
Weight:- 80 gm
SP1
MCC10
DLB2
AVO
INTERNATIONAL
UNITED KINGDOM
FAX: +44 (0)1304-502300/207342
TELEX: 96283 AVOMEG G.
UNITED STATES
FAX: (214) 333-3533
EXPORT FAX: (214) 337-3038
The Company reserves the right to change the specification or design without prior notice. AVO and MEGGER are the Registered Trade
Marks of AVO INTERNATIONAL LIMITED.