- 您現在的位置：買賣IC網 > PDF目錄98094 > SNJ54ACT374J (TEXAS INSTRUMENTS INC) ACT SERIES, 8-BIT DRIVER, TRUE OUTPUT, CDIP20 PDF資料下載
參數資料
| 型號： | SNJ54ACT374J |
| 廠商： | TEXAS INSTRUMENTS INC |
| 元件分類： | 總線收發(fā)器 |
| 英文描述： | ACT SERIES, 8-BIT DRIVER, TRUE OUTPUT, CDIP20 |
| 封裝： | CERAMIC, DIP-20 |
| 文件頁數： | 1/19頁 |
| 文件大小： | 752K |
| 代理商： | SNJ54ACT374J |
SN54ACT374, SN74ACT374
OCTAL D-TYPE EDGE-TRIGGERED FLIP-FLOPS
WITH 3-STATE OUTPUTS
SCAS539F OCTOBER 1995 REVISED NOVEMBER 2002
1
POST OFFICE BOX 655303
DALLAS, TEXAS 75265
D 4.5-V to 5.5-V V
CC Operation
D Inputs Accept Voltages to 5.5 V
D Max t
pd of 10 ns at 5 V
D Inputs Are TTL-Voltage Compatible
description/ordering information
These 8-bit flip-flops feature 3-state outputs
designed specifically for driving highly capacitive
or relatively low-impedance loads. The devices
are particularly suitable for implementing buffer
registers, I/O ports, bidirectional bus drivers, and
working registers.
The eight flip-flops of the ’ACT374 devices are
D-type edge-triggered flip-flops. On the positive
transition of the clock (CLK) input, the Q outputs
are set to the logic levels set up at the data (D)
inputs.
A buffered output-enable (OE) input can be used
to place the eight outputs in either a normal logic
state
(high
or
low
logic
levels)
or
the
high-impedance state. In the high-impedance
state, the outputs neither load nor drive the bus
lines significantly. The high-impedance state and
the increased drive provide the capability to drive
bus lines in bus-organized systems without need
for interface or pullup components.
OE does not affect internal operations of the flip-flop. Old data can be retained or new data can be entered while
the outputs are in the high-impedance state.
To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup
resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
ORDERING INFORMATION
TA
PACKAGE
ORDERABLE
PART NUMBER
TOP-SIDE
MARKING
PDIP N
Tube
SN74ACT374N
SOIC
DW
Tube
SN74ACT374DW
ACT374
40
°Cto85°C
SOIC DW
Tape and reel
SN74ACT374DWR
ACT374
40
°C to 85°C
SOP NS
Tape and reel
SN74ACT374NSR
ACT374
SSOP DB
Tape and reel
SN74ACT374DBR
AD374
TSSOP PW
Tape and reel
SN74ACT374PWR
AD374
CDIP J
Tube
SNJ54ACT374J
55
°C to 125°C
CFP W
Tube
SNJ54ACT374W
LCCC FK
Tube
SNJ54ACT374FK
Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are
available at www.ti.com/sc/package.
Copyright
2002, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
1
2
3
4
5
6
7
8
9
10
20
19
18
17
16
15
14
13
12
11
OE
1Q
1D
2D
2Q
3Q
3D
4D
4Q
GND
VCC
8Q
8D
7D
7Q
6Q
6D
5D
5Q
CLK
SN54ACT374 ...J OR W PACKAGE
SN74ACT374 . . . DB, DW, N, NS, OR PW PACKAGE
(TOP VIEW)
3
2 1 20 19
9 10 11 12 13
4
5
6
7
8
18
17
16
15
14
2D
2Q
3Q
3D
4D
SN54ACT374...FK PACKAGE
(TOP VIEW)
1D
1Q
OE
5Q
5D
8Q
4Q
GND
CLK
V
CC
8D
7D
7Q
6Q
6D
On products compliant to MIL-PRF-38535, all parameters are tested
unless otherwise noted. On all other products, production
processing does not necessarily include testing of all parameters.
相關PDF資料 |
PDF描述 |
|---|---|
| SN74ACT574NSR | ACT SERIES, 8-BIT DRIVER, TRUE OUTPUT, PDSO20 |
| SN74ACT574DWE4 | ACT SERIES, 8-BIT DRIVER, TRUE OUTPUT, PDSO20 |
| SN74ACT74DBRG4 | ACT SERIES, DUAL POSITIVE EDGE TRIGGERED D FLIP-FLOP, COMPLEMENTARY OUTPUT, PDSO14 |
| SN74ACT74PWRG4 | ACT SERIES, DUAL POSITIVE EDGE TRIGGERED D FLIP-FLOP, COMPLEMENTARY OUTPUT, PDSO14 |
| SN74ACT74DBR | ACT SERIES, DUAL POSITIVE EDGE TRIGGERED D FLIP-FLOP, COMPLEMENTARY OUTPUT, PDSO14 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| SNJ54ACT374W | 制造商:Texas Instruments 功能描述:Flip Flop D-Type Bus Interface Pos-Edge 3-ST 1-Element 20-Pin CFPAK Tube 制造商:Rochester Electronics LLC 功能描述:- Bulk |
| SNJ54ACT5634J | 制造商:TI 制造商全稱:Texas Instruments 功能描述:OCTAL D-TYPE TRANSPARENT LATCHES WITH 3-STATE OUTPUTS |
| SNJ54ACT563FK | 制造商:TI 制造商全稱:Texas Instruments 功能描述:OCTAL D-TYPE TRANSPARENT LATCHES WITH 3-STATE OUTPUTS |
| SNJ54ACT563J | 制造商:TI 制造商全稱:Texas Instruments 功能描述:OCTAL D-TYPE TRANSPARENT LATCHES WITH 3-STATE OUTPUTS |
| SNJ54ACT563W | 制造商:TI 制造商全稱:Texas Instruments 功能描述:OCTAL D-TYPE TRANSPARENT LATCHES WITH 3-STATE OUTPUTS |
發(fā)布緊急采購，3分鐘左右您將得到回復。