SM1145JD Series
4 Lead Surface Mount Plastic Clock Oscillator
CMOS with Enable/ Disable, 3rd Overtone Crystal Used
Low Jitter
Solder Pad Compatible to our SM11 Series, Epson SG615 & SG8002J
70.00 MHz – 170.00 MHz
Standard Specifications
Overall Frequency Stability
SM1145JD: ± 50 PPM, SM1144JD: ± 25 PPM, SM1120JD: ± 20 PPM over Operating Temp. Range
Operating Temperature Range
0 to +70°C is standard, but can be extended to - 40 to +85°C for certain frequencies
Supply Voltage (Vcc)
5.0 volts and 3.3 volts available
Symmetry (Duty Cycle)
40/60 to 60/40% is standard, but 45/55% at 50% of Vcc is also available (see Waveform 1)
Output Load
Enable/Disable Option (E/D)
Output enabled when Pin #1 is open or at Logic “1”; Output disabled when Pin #1 is at Logic “0”.
Suppy Current
Rise and Fall Time
Frequency Range
(MHz)
Typical
Maximum
Typical
Maximum
70.000 – 79.999
40.0
45.0
2.0
3.0
80.000 – 110.000
75.0
80.0
0.5
1.0
110.001 – 119.999
80.0
90.0
0.5
1.0
120.000 – 170.000
90.0
95.0
0.5
1.0
Part Numbering Guide
Model
Frequency Stability
45 = ± 50 PPM
44 = ± 25 PPM
Frequency in MHz
Special Specifications (choose all that apply)
Y: Std Specs (5.0V ± 10%, 0 to +70 C, 40/60% Symmetry)
E: Extended Operating Temperature Range (- 40 to +85 C)
S: 45/55% Symmetry at 50% of Vcc
V: Supply Voltage of 3.3 volts
SM11 45 JD Y -- 70.0M - 30
Consult factory for available frequencies and specs. Not all options available for all frequencies. A special part number may be assigned.
Mechanical:
not to scale
inches (mm)
°
Solder Pads
19013 36th Ave. West Suite H Lynnwood, WA 98036, USA
± 10%
Consult factory for higher frequencies
Frequency Stability is inclusive of frequency shifts due to calibration, temperature, supply voltage, shock, vibration and load
(425) 776 -1880, Fax: (425) 776-2760, ple-sales@pletronics.com, www.pletronics.com
7
Feb 2002
Pl tronics, Inc.
.15 (3.8)
.315
(8.0)
MAX
.385
(9.79)
MAX
.200 (5.08)
.520 (13.2) MAX
.300
(7.62)
.193 (4.9) MAX
1
2
3
4
OUT
Vcc
GND
E/D
Packaging
Tube or
24mm tape
12mm pitch
Standard load is 15pF maximum, see Test Circuit 3 (consult factory for heavier loads)
Icc (mA) w/ 15pF load
Tr & Tf (nS) w/ 15pF load
Due to part size and factory abilities, part marking may vary from lot to lot and may contain our part number or an internal code.
Logic Levels
Logic “1” 90% of Vcc MIN; Logic “0” 10% of Vcc MAX
Non-Std Output Load
Blank = 15 pF max, 30 = 30 pF max, 50 = 50 pF max
1 pS RMS maximum, from 12 kHz to 20 MHz from carrier
Jitter
20 = ± 20 PPM
.200 (5.08)
1
2
4
3
.23
(5.8)
.05
(1.3)
.12
(3.0)