參數資料
型號: SL2MOS5101EV,118
廠商: NXP Semiconductors
文件頁數: 14/28頁
文件大?。?/td> 0K
描述: IC I-CODE SLI PLLMC
標準包裝: 16,500
系列: *
136430
NXP B.V. 2007. All rights reserved.
Product data sheet
Rev. 3.0 — 14 March 2007
21 of 28
NXP Semiconductors
SL2 ICS50/SL2 ICS51
ICODE SLI-L/ICODE SLI-L HC
PUBLIC
8.1.3.14 Write EAS ID
Command Code = A7h
With the command Write EAS ID a new EAS Identifier is stored in the corresponding
configuration memory. If EAS is password protected (for Set and Reset EAS) the EAS
password has to be transmitted before with the Set Password command.
Table 47.
Request format
SOF
Flags
Write
EAS
IC Mfg code
UID
EAS ID
value
CRC16
EOF
8 bits
64 bits
optional
16 bits
8 bits
Table 48.
Response format when Error_flag is set
SOF
Flags
Error code
CRC16
EOF
8 bits
16 bits
Table 49.
Response format when Error_flag is NOT set
SOF
Flags
CRC16
EOF
8 bits
16 bits
8.2 Long range command
8.2.1 Long Range CMD
Command Code = 40h
The Long Range CMD command is designed to allow the use of the higher limits defined
in the ISO/TR 7003:1990. The bit and byte coding is the same as it is defined in EPC
Specification “13.56 MHz ISM Band Class 1 Radio Frequency (RF) Identification Tag
Interface Specification”.
To reduce the number of pulses the redundancy check is changed from an CRC8
calculation to a XOR of the transmitted parameters (Long Range CMD, Data Selector,
Number of Slots)
Number of Slots:
If the Data Selector is transmitted for EAS the label will ignore the received
Number of Slots parameter and will use always one Slot (like EAS Alarm
command, see Section 8.1.3.12 “EAS Alarm”). with EAS. For EAS typically 00h is
used as the value for Number of Slots to reduce the number of transmitted pulses.
If the Data Selector is transmitted for UID or EPC the label will respond within one
of the transmitted Number of Slots on a pseudo random basis and will calculate a
new slot for a following command.
Labels, which have executed a Destroy EPC command before will not respond to this
command, if the Data Selector for EPC is transmitted.
Table 50.
Request format
SSOF
Long Range
CMD
Data
Selector
Number of Slots
XOR
CEOF
8 bits
相關PDF資料
PDF描述
SLE 5542 M3.2 IC MEMORY
SLE 55R04 P-MCC2-2-1 IC EEPROM 770BYTE MCC2-2
SM320F28335GHHAEP IC DIGITAL SIGNAL CTLR 179-BGA
SMA4306-TL-H IC OSC FOR LASER DIODE SCH6
SN65LVDS047DG4 IC LVDS QUAD DIFF DVR 16-SOIC
相關代理商/技術參數
參數描述
SL2MOS5301EV,118 功能描述:數據轉換系統 Dedicated Chip For Smart Lapel APPS RoHS:否 制造商:Texas Instruments 轉換速率:0.001 MSPs 分辨率:24 bit 最大工作溫度:+ 125 C 最小工作溫度:- 40 C 安裝風格:SMD/SMT 封裝 / 箱體:TQFP-64 封裝:Reel
SL2MOS5401EV,118 功能描述:數據轉換系統 Addendum contactless chip card module RoHS:否 制造商:Texas Instruments 轉換速率:0.001 MSPs 分辨率:24 bit 最大工作溫度:+ 125 C 最小工作溫度:- 40 C 安裝風格:SMD/SMT 封裝 / 箱體:TQFP-64 封裝:Reel
SL2N4RLGH 制造商:Dialight 功能描述:
SL2P2/036000 制造商:AMETEK Technical and Industrial Products 功能描述:Regenerative Blower, SPIRAL Simplex, instrument grade, .5HP, ODP-CS, 115-1-50/60
SL2P52/036013 制造商:AMETEK Technical and Industrial Products 功能描述:Blower, regenerative, instr grade, .5HP, ODP-CS, 220/208-230V, 1 Ph, 50/60 Hz