SL28PCIe16
DOC#: SP-AP-0790 (Rev. 0.3)
Page 12 of 12
Document History Page
Document Title: SL28PCIe16 PC EProClock PCI Express Gen 2 & Gen 3 Clock Generator
DOC#: SP-AP-0790 (Rev. 0.3)
REV.
Issue Date
Orig. of
Change
Description of Change
AA
11/15/10
JMA
Initial Release
AA
12/15/10
TRP
1. Updated Control Registers
2. Updated VOH/VOL spec
3. Removed IDD_PD spec
4. Updated foot note
AB
1/13/11
TRP
1. Updated IDD current
2. Updated Byte8 default
3. Removed skew spec
The information in this document is believed to be accurate in all respects at the time of publication but is subject to change without notice. Sil-
icon Laboratories assumes no responsibility for errors and omissions, and disclaims responsibility for any consequences resulting from the
use of information included herein. Additionally, Silicon Laboratories assumes no responsibility for the functioning of undescribed features or
parameters. Silicon Laboratories reserves the right to make changes without further notice. Silicon Laboratories makes no warranty, repre-
sentation or guarantee regarding the suitability of its products for any particular purpose, nor does Silicon Laboratories assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation conse-
quential or incidental damages. Silicon Laboratories products are not designed, intended, or authorized for use in applications intended to
support or sustain life, or for any other application in which the failure of the Silicon Laboratories product could create a situation where per-
sonal injury or death may occur. Should Buyer purchase or use Silicon Laboratories products for any such unintended or unauthorized appli-
cation, Buyer shall indemnify and hold Silicon Laboratories harmless against all claims and damages.