
SiI0680 Starter Kit
The starter kit includes hard-
ware, software and documenta-
tion to quickly bring ATA/133
and 48-bit sector-addressing
compliance to computer sys-
tems, motherboards, add-in
cards and embedded solutions.
Contents Include:
Hardware
Reference design board
Two ATA cables
Software
Operating system drivers for
DOS, Windows 95/98, ME,
NT4, 2000 and XP
Configuration utility
Flash utility
- Base BIOS
- Medley RAID BIOS
RAID operating system
drivers for Windows 98,
ME, NT4, 2000, and XP
Documentation
SiI0680 install guide
Medley ATA software RAID
users guide
SiI0680 data sheet
SiI0680
Features
General
ATA/133
48-bit sector addressing
Dual independent DMA channels with 256B
FIFO per channel
Virtual DMA
Read ahead
Command buffering
Supports temperature from 0°c to 70°c
Supports external Flash
Supports external BIOS
80-pin cable detect
Transfer Rates
PIO-0, 1, 2, 3, 4
MDMA Mode 0, 1, 2
Ultra 33, 66, 100 and 133
Supports bus master DMA at 133 MB/sec
burst rate
PCI Bus
32-bit, 33 MHz
PCI 2.2 compliant
Power
3.3V Operating Voltage with 5V tolerant I/O
ACPI: PCI Bus Power Management Spec 1.1
compliant
Package
144-pin, 20x20 mm LQFP (Low profile Quad
Flat Pack)
RAID (with Silicon Image's Medley ATA
software RAID)
RAID 0 (Striping)
RAID 1 (Mirroring)
RAID 0+1 (Mirrored-Striping)
2006 Silicon Image, Inc. All rights reserved. Silicon Image, the Silicon Image logo, SteelVine, the SteelVine logo, SiI and SiI0680 are trademarks or registered trademarks of Silicon Image, Inc. in the United States
and other countries. Other trademarks are property of their respective holders. Product specifications are subject to change without notice.
Part Number: SiI0680CL144
SiI PB-12 rev2 8/06
Silicon Image, Inc.
1060 E. Arques Avenue
Sunnyvale, CA 94085
T 408.616.4000
F 408.830.9530
www.siliconimage.com
SiI0680 Circuit Diagram