- 您現在的位置：買賣IC網 > PDF目錄67969 > SD80C32XXX-36SC (ATMEL CORP) 8-BIT, 36 MHz, MICROCONTROLLER, CDIP40 PDF資料下載
參數資料
| 型號： | SD80C32XXX-36SC |
| 廠商： | ATMEL CORP |
| 元件分類： | 微控制器/微處理器 |
| 英文描述： | 8-BIT, 36 MHz, MICROCONTROLLER, CDIP40 |
| 封裝： | 0.600 INCH, CERAMIC, DIP-40 |
| 文件頁數： | 15/20頁 |
| 文件大小： | 194K |
| 代理商： | SD80C32XXX-36SC |
80C32/80C52/80C32E
4
Rev. J
– July 03, 2000
4. Pin Description
4.1. VSS
Circuit ground potential.
4.2. VCC
Supply voltage during normal, Idle, and Power Down operation.
4.3. Port 0
Port 0 is an 8 bit open drain bi-directional I/O port. Port 0 pins that have 1’s written to them float, and in that state can
be used as high-impedance inputs.
Port 0 is also the multiplexed low-order address and data bus during accesses to external Program and Data Memory.
In this application it uses strong internal pullups when emitting 1’s. Port 0 also outputs the code bytes during program
verification in the 80C52. External pullups are required during program verification. Port 0 can sink eight LS TTL
inputs.
4.4. Port 1
Port 1 is an 8 bit bi-directional I/O port with internal pullups. Port 1 pins that have 1’s written to them are pulled high
by the internal pullups, and in that state can be used as inputs. As inputs, Port 1 pins that are externally being pulled
low will source current (IIL, on the data sheet) because of the internal pullups.
Port 1 also receives the low-order address byte during program verification. In the 80C52, Port 1 can sink/ source three
LS TTL inputs. It can drive CMOS inputs without external pullups.
2 inputs of PORT 1 are also used for timer/counter 2 :
P1.0 [T2]: External clock input for timer/counter 2. P1.1 [T2EX]: A trigger input for timer/counter 2, to be reloaded
or captured causing the timer/counter 2 interrupt.
4.5. Port 2
Port 2 is an 8 bit bi-directional I/O port with internal pullups. Port 2 pins that have 1’s written to them are pulled high
by the internal pullups, and in that state can be used as inputs. As inputs, Port 2 pins that are externally being pulled
low will source current (ILL, on the data sheet) because of the internal pullups. Port 2 emits the high-order address
byte during fetches from external Program Memory and during accesses to external Data Memory that use 16 bit
addresses (MOVX @DPTR). In this application, it uses strong internal pullups when emitting 1’s. During accesses to
external Data Memory that use 8 bit addresses (MOVX @Ri), Port 2 emits the contents of the P2 Special Function
Register.
It also receives the high-order address bits and control signals during program verification in the 80C52. Port 2 can
sink/source three LS TTL inputs. It can drive CMOS inputs without external pullups.
4.6. Port 3
Port 3 is an 8 bit bi-directional I/O port with internal pullups. Port 3 pins that have 1’s written to them are pulled high
by the internal pullups, and in that state can be used as inputs. As inputs, Port 3 pins that are externally being pulled
low will source current (ILL, on the data sheet) because of the pullups. It also serves the functions of various special
features of the TEMIC 51 Family, as listed below.
相關PDF資料 |
PDF描述 |
|---|---|
| SD80C32XXX-36/883 | 8-BIT, 36 MHz, MICROCONTROLLER, CDIP40 |
| SD80C32XXX-12/883 | 8-BIT, 12 MHz, MICROCONTROLLER, CDIP40 |
| SC80C32XXX-12SV | 8-BIT, 12 MHz, MICROCONTROLLER, CDIP40 |
| SC80C32XXX-12/883 | 8-BIT, 12 MHz, MICROCONTROLLER, CDIP40 |
| SC80C52XXX-12SB | 8-BIT, MROM, 12 MHz, MICROCONTROLLER, CDIP40 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| SD-80J | 功能描述:CONN CIRCULAR DIN 8 PIN FEMALE RoHS:是 類別:連接器，互連式 >> 圓形 系列:SD 產品目錄繪圖:MD-60 In Line Mating Face MD-xxJ Series MD-xxJ Series Front MD-xxJ Series Cable End MD-xxJ Series Side MD-xxJ Series Assembly 3D 型號:MD-60J 標準包裝:100 系列:MD 連接器類型:插座，母形插口 位置數:6 外殼尺寸 - 插件:迷你型 DIN 外殼尺寸，MIL:- 安裝類型:自由懸掛 端子:備有焊接、壓接引腳適配器 緊固型:推挽式 方向:帶標記 防護等級:- 外殼材料，表面處理:銅，鍍鎳 觸點表面涂層:銀 特點:- 包裝:散裝 觸點涂層厚度:- 額定電流:1A，2A 電壓 - 額定:100VAC，12VDC 工作溫度:-20°C ~ 105°C 產品目錄頁面:434 (CN2011-ZH PDF) 配套產品:CP-2060-ND - CONN MINI-DIN 6 PIN MALE 相關產品:CP-9999-ND - CONTACT PIN CRIMP MINI DIN TIN 其它名稱:045-0227RCP-2160 |
| SD-80LP | 功能描述:CONN DIN PLUG LOCKING IN-LINE 8P RoHS:是 類別:連接器，互連式 >> 圓形 系列:SD 標準包裝:1 系列:MIL-DTL-5015, CT 連接器類型:插座，母形插口 位置數:5 外殼尺寸 - 插件:14S-5 外殼尺寸，MIL:- 安裝類型:面板安裝，法蘭 端子:壓接 緊固型:有螺紋 方向:N（正常型） 防護等級:抗環境影響 外殼材料，表面處理:鋁，鍍草綠色鎘 觸點表面涂層:金 特點:- 包裝:散裝 觸點涂層厚度:- 額定電流:- 電壓 - 額定:200VAC，250VDC 工作溫度:-55°C ~ 125°C 配套產品:ICT6E14S-5PCAU-ND - CONN PLUG 5POS STRAIGHT W/PINS 其它名稱:ICT2-14S-5SCAU |
| SD-80LS | 功能描述:CONN DIN RECPT LOCKING PNL MT 8P RoHS:是 類別:連接器，互連式 >> 圓形 系列:SD 標準包裝:1 系列:MIL-DTL-5015, CT 連接器類型:插座，母形插口 位置數:5 外殼尺寸 - 插件:14S-5 外殼尺寸，MIL:- 安裝類型:面板安裝，法蘭 端子:壓接 緊固型:有螺紋 方向:N（正常型） 防護等級:抗環境影響 外殼材料，表面處理:鋁，鍍草綠色鎘 觸點表面涂層:金 特點:- 包裝:散裝 觸點涂層厚度:- 額定電流:- 電壓 - 額定:200VAC，250VDC 工作溫度:-55°C ~ 125°C 配套產品:ICT6E14S-5PCAU-ND - CONN PLUG 5POS STRAIGHT W/PINS 其它名稱:ICT2-14S-5SCAU |
| SD-80SN | 功能描述:CONN DIN 8 PIN FEMALE PANEL MNT RoHS:是 類別:連接器，互連式 >> 圓形 系列:SD 產品目錄繪圖:MD-60 In Line Mating Face MD-xxJ Series MD-xxJ Series Front MD-xxJ Series Cable End MD-xxJ Series Side MD-xxJ Series Assembly 3D 型號:MD-60J 標準包裝:100 系列:MD 連接器類型:插座，母形插口 位置數:6 外殼尺寸 - 插件:迷你型 DIN 外殼尺寸，MIL:- 安裝類型:自由懸掛 端子:備有焊接、壓接引腳適配器 緊固型:推挽式 方向:帶標記 防護等級:- 外殼材料，表面處理:銅，鍍鎳 觸點表面涂層:銀 特點:- 包裝:散裝 觸點涂層厚度:- 額定電流:1A，2A 電壓 - 額定:100VAC，12VDC 工作溫度:-20°C ~ 105°C 產品目錄頁面:434 (CN2011-ZH PDF) 配套產品:CP-2060-ND - CONN MINI-DIN 6 PIN MALE 相關產品:CP-9999-ND - CONTACT PIN CRIMP MINI DIN TIN 其它名稱:045-0227RCP-2160 |
| SD-81 | 制造商:CUI 制造商全稱:CUI INC 功能描述:SERIES: SD DESCRIPTION: STANDARD DIN CONNECTOR |
發布緊急采購，3分鐘左右您將得到回復。