參數資料
型號： SC16C850IET,151
廠商： NXP Semiconductors
文件頁數： 24/55頁
文件大?。?/td> 0K
描述： IC UART SINGLE W/FIFO 36-TFBGA
標準包裝： 490
特點： 可編程
通道數： 1，UART
FIFO's： 128 字節
規程： RS485
電源電壓： 2.5 V ~ 3.3 V
帶自動流量控制功能： 是
帶IrDA 編碼器/解碼器： 是
帶故障啟動位檢測功能： 是
帶調制解調器控制功能： 是
帶CMOS： 是
安裝類型： 表面貼裝
封裝/外殼： 36-TFBGA
供應商設備封裝： 36-TFBGA（3.5x3.5）
包裝： 托盤
其它名稱： 935284685151
SC16C850IET-S
SC16C850IET-S-ND
SC16C850
All information provided in this document is subject to legal disclaimers.
NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 2 — 11 November 2010
30 of 55
NXP Semiconductors
SC16C850
2.5 to 3.3 V UART with 128-byte FIFOs and IrDA encoder/decoder
7.8 Modem Status Register (MSR)
This register shares the same address as EFCR register. This is a read-only register and
it provides the current state of the control interface signals from the modem, or other
peripheral device to which the SC16C850 is connected. Four bits of this register are used
to indicate the changed information. These bits are set to a logic 1 whenever a control
input from the modem changes state. These bits are set to a logic 0 whenever the CPU
reads this register.
When write, the data will be written to EFCR register.
[1]
Whenever any MSR bit 3:0 is set to logic 1, a Modem Status Interrupt will be generated.
Table 21.
Modem Status Register bits description
Bit
Symbol
Description
7
MSR[7]
CD. During normal operation, this bit is the complement of the CD input.
Reading this bit in the loopback mode produces the state of MCR[3] (OP2).
6
MSR[6]
RI. During normal operation, this bit is the complement of the RI input.
Reading this bit in the loopback mode produces the state of MCR[2] (OP1).
5
MSR[5]
DSR. During normal operation, this bit is the complement of the DSR input.
During the loopback mode, this bit is equivalent to MCR[0] (DTR).
4
MSR[4]
CTS. During normal operation, this bit is the complement of the CTS input.
During the loopback mode, this bit is equivalent to MCR[1] (RTS).
3MSR[3]
ΔCD [1]
logic 0 = no CD change (normal default condition)
logic 1 = the CD input to the SC16C850 has changed state since the last
time it was read. A modem Status Interrupt will be generated.
2MSR[2]
ΔRI [1]
logic 0 = no RI change (normal default condition)
logic 1 = the RI input to the SC16C850 has changed from a logic 0 to a
logic 1. A modem Status Interrupt will be generated.
1MSR[1]
ΔDSR [1]
logic 0 = no DSR change (normal default condition)
logic 1 = the DSR input to the SC16C850 has changed state since the
last time it was read. A modem Status Interrupt will be generated.
0MSR[0]
ΔCTS [1]
logic 0 = no CTS change (normal default condition)
logic 1 = the CTS input to the SC16C850 has changed state since the last
time it was read. A modem Status Interrupt will be generated.
相關PDF資料
PDF描述
SC16IS750IPW-T IC UART I2C/SPI 24-TSSOP
ATMEGA16L-8MUR MCU AVR 16KB FLASH 16MHZ 44QFN
VE-B5B-IY CONVERTER MOD DC/DC 95V 50W
VE-B3Y-IY CONVERTER MOD DC/DC 3.3V 33W
VE-B3W-IY CONVERTER MOD DC/DC 5.5V 50W
相關代理商/技術參數
參數描述
SC16C850IET-G 功能描述:UART 接口集成電路 16C 2.5-5V 5MBPS UART 128BFIFO RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
SC16C850IET-S 功能描述:UART 接口集成電路 16C 2.5-5V 5MBPS UART 128BFIFO RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
SC16C850L 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:1.8 V single UART, 5 Mbit/s (max.) with 128-byte FIFOs, infrared (IrDA) and 16 mode or 68 mode parallel bus interface
SC16C850LIB,128 制造商:NXP Semiconductors 功能描述:
SC16C850LIB,151 制造商:NXP Semiconductors 功能描述:
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*