參數資料
型號: SC16C654DIB64
廠商: NXP SEMICONDUCTORS
元件分類: 微控制器/微處理器
英文描述: Quad UART with 64-byte FIFO and infrared (IrDA) encoder/decoder
中文描述: 4 CHANNEL(S), 5M bps, SERIAL COMM CONTROLLER, PQFP64
封裝: 10 X 10 MM, 1.40 MM HEIGHT, PLASTIC, MS-026, SOT-314-2, LQFP-64
文件頁數: 31/52頁
文件大?。?/td> 647K
代理商: SC16C654DIB64
Philips Semiconductors
SC16C654/654D
Quad UART with 64-byte FIFO and infrared (IrDA) encoder/decoder
Product data
Rev. 04 — 19 June 2003
31 of 52
9397 750 11617
Koninklijke Philips Electronics N.V. 2003. All rights reserved.
[1]
Whenever any MSR bit 0-3 is set to logic 1, a Modem Status Interrupt will be generated.
7.9 Scratchpad Register (SPR)
The SC16C654/654D provides a temporary data register to store 8 bits of user
information.
7.10 Enhanced Feature Register (EFR)
Enhanced features are enabled or disabled using this register.
Bits 0 through 4 provide single or dual character software flow control selection.
When the Xon1 and Xon2 and/or Xoff1 and Xoff2 modes are selected, the double
8-bit words are concatenated into two sequential numbers.
1
MSR[1]
DSR
[1]
Logic 0 = No DSR change (normal default condition).
Logic 1 = The DSR input to the SC16C654/654D has changed state
since the last time it was read. A Modem Status Interrupt will be
generated.
CTS
[1]
Logic 0 = No CTS change (normal default condition).
Logic 1 = The CTS input to the SC16C654/654D has changed state
since the last time it was read. A Modem Status Interrupt will be
generated.
0
MSR[0]
Table 21:
Bit
Modem Status Register bits description
…continued
Symbol
Description
Table 22:
Bit
7
Enhanced Feature Register bits description
Symbol
Description
EFR[7]
Auto CTS. Automatic CTS Flow Control.
Logic 0 = Automatic CTS flow control is disabled (normal default
condition).
Logic 1 = Enable Automatic CTS flow control. Transmission will stop
when CTS goes to a logical 1. Transmission will resume when the CTS
pin returns to a logical 0.
EFR[6]
Auto RTS. Automatic RTS may be used for hardware flow control by
enabling EFR[6]. When Auto RTS is selected, an interrupt will be
generated when the receive FIFO is filled to the programmed trigger
level and RTS will go to a logic 1 at the next trigger level. RTS will return
to a logic 0 when data is unloaded below the next lower trigger level
(Programmed trigger level -1). The state of this register bit changes with
the status of the hardware flow control. RTS functions normally when
hardware flow control is disabled.
Logic 0 = Automatic RTS flow control is disabled (normal default
condition).
Logic 1 = Enable Automatic RTS flow control.
6
相關PDF資料
PDF描述
SC16C654IA68 Quad UART with 64-byte FIFO and infrared (IrDA) encoder/decoder
SC16C750 Universal Asynchronous Receiver/Transmitter (UART) with 64-byte FIFO
SC16C750IA44 Universal Asynchronous Receiver/Transmitter (UART) with 64-byte FIFO
SC16C750IB64 Universal Asynchronous Receiver/Transmitter (UART) with 64-byte FIFO
SC16C752 Dual UART with 64-byte FIFO
相關代理商/技術參數
參數描述
SC16C654DIB64,128 功能描述:UART 接口集成電路 16C 2.5V-5V 4CH UART 64B FIFO RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
SC16C654DIB64,151 功能描述:UART 接口集成電路 16C 2.5V-5V 4CH UART 64B FIFO RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
SC16C654DIB64,157 功能描述:UART 接口集成電路 16C 2.5V-5V 4CH UART 64B FIFO RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
SC16C654IA68 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Quad UART with 64-byte FIFO and infrared (IrDA) encoder/decoder
SC16C654IA68,512 功能描述:UART 接口集成電路 16C 2.5V-5V 4CH UART 64B FIFO RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel