
11
Data Device Corporation
www.ddc-web.com
SB-36220IX
L-01/06-0
ORDERING INFORMATION
SB-3622 X I X - X X X X
Supplemental Process Required
Blank = None
N = Conformal Coat (NOTE 7)
Hybrid Type and Accuracy (NOTE 1)
3 = DSC-11520-305 (1 minute)
5 = DSC-11524-304 (2 minutes)
8 = DR-11525DX-305 (1 minute)
Number of Channels:
1 = One channel
2 = Two channels
3 = Three channels
4 = Four channels
5 = Five channels
6 = Six channels
Temperature Range:
3 = 0°C to +70°C
Reference Input Type/Oscillator Output:
0 = External, solid state non-isolated (4.4 Vrms, 26 Vrms or 115 Vrms) (NO on board oscillator)
1 = External, 26 Vrms/400Hz transformer isolated (NO on board oscillator)
2 = External, 115 Vrms/400Hz transformer isolated (NO on board oscillator)
3 = External, 115 Vrms/60Hz transformer isolated (NO on board oscillator)
4 = Internal, 3.4 Vrms Differential (300 mA max) (Notes 6, 8)
5 = Internal, 1.5 VA Drive, 26 Vrms Transformer Isolation (60 mA max) (Note 8)
6 = Internal, 1.5 VA Drive, 115 Vrms Transformer Isolation (13 mA max) (Notes 4, 8)
1 = 11.8 Vrms L-L Synchro
3/2 MA
2 = 11.8 Vrms L-L Resolver
8/2 MA
3 = 6.8 Vrms Resolver (NOTE 5)
8/2 MA
4 = 2 Vrms Single Ended Resolver
(NOTES 2 and 5, 9)
8/2 MA
5 = 11.8 Vrms L-L Synchro/400Hz,
Transformer coupled (NOTE 3)
—
Output Type (Note 1)
Hybrid Type/
Drive
26V
4.4V
26V
For Programmable Internal Oscillator
Selections, Reference Voltage Required to
Obtain the Listed Output is :
6 = 11.8 Vrms L-L Resolver/400Hz,
Transformer coupled (NOTE 3)
—
7 = 90 Vrms L-L Synchro/400Hz,
Transformer coupled (NOTE 3)
—
26V
115V
5/15 MA
—
5/14 MA
5/1.9 MA
1 Min
Accuracy
2 Min
Accuracy
0,1,2,3,5,6
0,1,2,3,4,5,6 (note 6)
0,1,2,5,6
Reference Input
Type/Oscillator
Output Selections
0,1,2,5,6
8 = 90 Vrms L-L Synchro/60Hz,
Transformer coupled (NOTE 3)
—
115V
5/1.9 MA
0,3,6
Notes:
1) All channels are configured for the same converter type and output types. For non-standard configurations please contact factory.
2) 2 Volt Resolver output requires the DR-11525 converter, with a 4.4Vrms reference voltage input.
3) Transformer isolated output requires the DSC-11524 converter. (Add 1.5 minutes to specified accuracy with transformer coupled option.), option
output type 8, 90V 60Hz adds 2.5 minutes to specified accuracy.
4) Reference type 6 (Internal, 115V high current) requires 2 slots.
5) Outputs are single ended, S1 and S4 are no connect, use card appropriate channel common ground.
6) Oscillator Option #4 (3.4 Vrms) is a low cost option when output voltages of 1.5 Vrms or less are needed to be scaled with output type 4.
7) For conformal coated boards all components will be soldered down, no sockets.
8) Oscillator Output is programmable to MAX voltage of option selection range. Frequency range is programmable per spec table 1.
9) For differential mode configuration, use S1, S2, S3, S4 and note that output voltage will be approx 4Vrms and can be scaled down via ref input voltage. Do not connect
either differential pair to ground.
Included Accessories:
MN-3622XXX-001 Hardware and Software Manual
Windows GUI, DLL’s and libraries software provided (CD format)
1 mating connector, 50 pin, D-type
PCI retainer and screws
SUGGESTED MATING CONNECTORS:
-Solder Plug: 3M 10150-3000VE
-Junction Shell: 3M 10350-52FO-008
Hybrid Type/
Drive
Note: The above products contain tin-lead solder.