10
Data Device Corporation
www.ddc-web.com
SB-36210IX
J-01/06-0
ORDERING INFORMATION
SB-3621 X I X -X X X X
Supplemental Process Requirements:
Blank = None
N = Conformal Coating (Note 8)
Accuracy / Output (Note 1):
1 = 1 min + 1 LSB, “A quad B” output
3 = 1 min + 1 LSB, Velocity output
Number of Channels:
6 = six channels. (All cards come with six channels)
Temperature Range:
3 = 0° to +70°C
Oscillator Output (Note 10):
X = 2.0 Vrms low current (0.5 mA max. single-ended drive)
A = 1.5 VA Drive, 26 Vrms transformer isolation (60 mA max.)
B = 1.5 VA Drive, 115 Vrms transformer isolation (13 mA max.) (Note 7)
Input / Reference Type (Notes 2 and 5):
Select Oscillator Type
0 = 2 Vrms Direct - 400Hz
A or X
1 = 11.8 Vrms L-L Synchro - 400Hz
A (Note 9)
2 = 11.8 Vrms L-L Resolver - 400Hz
A (Note 9)
3 = 90 Vrms L-L Synchro - 400Hz
B (Note 9)
4 = 90 Vrms L-L Synchro - 60Hz (Note 7)
B (Note 9)
5 = 90 Vrms L-L Synchro - 400Hz w/Transformer Isolation (Notes 6 and 7)
B (Note 9)
6 = 90 Vrms L-L Synchro - 60Hz w/Transformer Isolation (Notes 6 and 7)
B (Note 9)
7 = 11.8 Vrms L-L Resolver - 400Hz w/Transformer Isolation (Notes 6 and 7)
A (Note 9)
8 = 11.8 Vrms L-L Synchro - 400Hz w/Transformer Isolation (Notes 6 and 7)
A (Note 9)
9 = LVDT Input - 400Hz (Note 7)
A or X
Notes:
1. See TABLE 1 for accuracy vs. frequency.
2. Solid state input types (Input/reference types 0, 1, 2, 3, 4, and 9) use surface mount resistors, and the reference input has a voltage divider network.
This voltage divider will allow for reference input ranges of 2.0 Vrms to 40 Vrms (26 Vrms nominal) or 50 Vrms to 130 Vrms (115 Vrms nominal). This
is preset at the factory as specified by the ordering information. When the signal input is transformer isolated, the reference is also isolated.
3. Consult factory for switch on the fly option. See RD-19230 data sheet.
4. See manual for detailed hardware/software information.
5. Card Bandwidth: 60 Hz cards have a bandwidth selection of 15/45 Hz, 400 Hz cards have a bandwidth selection of 100/300 Hz.
6. Add 1 minute to specified accuracy.
7. Consult factory or local sales rep for lead times.
8. For conformal coated boards all components will be soldered down, no sockets.
9. If an oscillator is not needed, order the lower cost oscillator output option X.
10.Oscillator output is programmable to max voltage of option selection. Frequency range is programmable per TABLE 1 specifications table.
11.The above products contain tin-lead solder.
INCLUDED ACCESSORIES:
- MN-36210 Hardware/Software Manual
- Windows GUI, DLL’s & Libraries, Software Provided (CD Format)
- 1 Mating Connector
- Slot Guide Hardware
- LVDT Component Header for Input/Ref Option 9 Cards Only
- PCI Retainer and Screws
—
DDC ATP
ELECTRICAL TEST
Class 3
IPC-A-610
INSPECTION / WORKMANSHIP
CONDITION(S)
METHOD(S)
TEST
STANDARD DDC PROCESSING
FOR DISCRETE MODULES/PC BOARD ASSEMBLIES