- 您現在的位置：買賣IC網 > PDF目錄365499 > SAFC85.380ME35X (MURATA MANUFACTURING CO LTD) CERAMIC MICROWAVE FILTERS SAW FILTERS PDF資料下載
參數資料
| 型號： | SAFC85.380ME35X |
| 廠商： | MURATA MANUFACTURING CO LTD |
| 元件分類： | 聲表面波濾波器 |
| 英文描述： | CERAMIC MICROWAVE FILTERS SAW FILTERS |
| 中文描述： | 1 FUNCTIONS, 85.38 MHz, SAW FILTER |
| 文件頁數： | 5/5頁 |
| 文件大?。?/td> | 150K |
| 代理商： | SAFC85.380ME35X |
CERAMIC MICROWAVE FILTERS
SAW FILTERS
ENVIRONMENTAL SPECIFICATIONS
MECHANICAL
TEST ITEM
PACKAGE
TEST CONDITIONS
TEST METHOD
Filter is soldered onto the center of PCB which is laid on two small supporters
spaced 90mm apart. The PCB is deflected to 1mm below the horizontal level by the
pressing stick for 1 second and repeated 5 times.
A force of 1.0 Kg shall be applied to each terminal in the direction of the axis of
terminal for 30 ± 5 seconds.
A force of 250 gf is applied to each lead in axial direction. The lead shall be bent
90 degrees to one direction, then in opposite direction and returned to the
original position.
Lead terminals are immersed in methanol with 7 to 10% of rosin flux for about
5 seconds, then immersed in soldering bath at 230 ± 5°C for 5 ± 0.5 seconds.
Drop 3 times on concrete floor from 1.0 meter, (30cm for some products).
Vibration amplitude of 1.5mm at 10-55Hz in each of three mutually
perpendicular directions for 1 hour.
SMD
Terminal Strength
LEADED
Solderability
BOTH
MIL-STD-202E
Method 208C
Random Drop
BOTH
Vibration
BOTH
MIL-STD-201E
Method 201A
ENVIRONMENTAL
TEST ITEM
PACKAGE
TEST CONDITIONS
TEST METHOD
MIL-STD-202E
Method 101D
MIL-STD-202E
Method 102A
MIL-STD-202E
Method 103B
Salt Spray
BOTH
Hold in chamber with 5% salt density at 35°C +1.1°/–1.7°C for 48 hours.
Measure after exposure to room condition for 1 hour.
Exposure to 5 cycles of –55°C (30 minutes)
+25°C (15 minutes), ±85°C
(30 minutes)
+25°C (15 minutes). Test after 2 hours exposure to room conditions.
Hold in chamber with 90 to 95% R.H. at 40 ± 2°C for 100 hours. Test after 2
hours exposure to room conditions.
Hold in chamber with 90 to 95% R.H. at 40 ± 2°C for 100 hours at 6VDC.
Test after 2 hours exposure to room conditions.
Expose to 5 cycles of –55°C (30 minutes)
+85°C (30 minutes). Test after 2 hours
exposure to room conditions.
Hold in chamber at 85 ± 2°C for 100 hours. Test after exposure to room
conditions for 2 hours.
Hold in chamber at –30 ± 2°C for 100 hours. Test after exposure to room
conditions for 2 hours.
Hold in chamber at 85 ± 2°C for 100 hours at 6VDC. Test after exposure to room
conditions for 2 hours.
Hold in chamber with 1000ppm sulfur density for 24 hours. Test after exposure
to room conditions for 2 hours.
Filter shall be preheated at 150 ± 20°C for 60 seconds, immersed whole
electrode in soldering bath at 240 ± 5°C for 3 ± 1 seconds, then measured after
exposure to room conditions for 2 hours.
Lead terminals are immersed up to 1.5mm from package base in soldering bath
at 260 ± 5°C for 10 ± 1 seconds, then measured after exposure to room
conditions for 2 hours.
Temperature Cycling
BOTH
Humidity
BOTH
Operating Humidity
BOTH
MIL-STD-202E
Thermal Shock
BOTH
MIL-STD-202E
Method 107D
MIL-STD-202E
Method 108A
MIL-STD-202E
Method 108A
Life Test (High)
BOTH
Life Test (Low)
BOTH
Operating Life Test
BOTH
Sulfuration
BOTH
SMD
Resistance to
Soldering Heat
MIL-STD-202E
Method 210A
LEADED
TEST ITEM
PACKAGE
TEST CONDITIONS
TEST METHOD
Dielectric Withstanding
Voltage
BOTH
Apply 100VDC between I/O terminals and ground terminal, for 1 minute.
MIL-STD-202E
Insulation Resistance
BOTH
Apply 100VDC between I/O terminals and ground terminal, for 1 minute.
MIL-STD-202E
Method 302
Temperature
Characteristics
SMD
Filter shall be measured between –10°C to +60°C temperature range.
LEADED
Filter shall be measured between –10°C to +50°C temperature range.
ELECTRICAL
354
CG01-I
SAF Series
相關PDF資料 |
PDF描述 |
|---|---|
| SAFC959ME70T | CERAMIC MICROWAVE FILTERS SAW FILTERS |
| SAFS1441MC1B0T | CERAMIC MICROWAVE FILTERS SAW FILTERS |
| SAH02 | Silicon PNP Epitaxial Planar Transistor with Shottky Barrier Diode(Chopper Regulator) |
| SAH03 | Silicon PNP Epitaxial Planar Transistor with Fast-Recovery Rectifier Diode(Voltage change switch for motor) |
| SAI01 | Surface-Mount, Separate Excitation Switching Type |
相關代理商/技術參數 |
參數描述 |
|---|---|
| SAFC860.5MA70N | 制造商:MURATA 制造商全稱:Murata Manufacturing Co., Ltd. 功能描述:CERAMIC MICROWAVE FILTERS SAW FILTERS |
| SAFC864MF70T | 制造商:MURATA 制造商全稱:Murata Manufacturing Co., Ltd. 功能描述:CERAMIC MICROWAVE FILTERS SAW FILTERS |
| SAFC8681SG | 制造商:Infineon Technologies AG 功能描述: |
| SAF-C868-1SG-ESAB | 制造商:Infineon Technologies AG 功能描述: |
| SAFC8681SR | 制造商:Infineon Technologies AG 功能描述: |
發布緊急采購，3分鐘左右您將得到回復。