參數資料
型號： SAB-C167CR-LM
廠商： SIEMENS A G
元件分類： 微控制器/微處理器
英文描述： 16-Bit CMOS Single-Chip Microcontroller
中文描述： 16-BIT, 20 MHz, MICROCONTROLLER, PQFP144
文件頁數： 34/80頁
文件大?。?/td> 1151K
代理商： SAB-C167CR-LM
C167CS-4R
C167CS-L
Data Sheet
30
V2.0, 2000-06
A/D Converter
For analog signal measurement, a 10-bit A/D converter with 24 multiplexed input
channels (16 standard channels and 8 extension channels) and a sample and hold
circuit has been integrated on-chip. It uses the method of successive approximation. The
sample time (for loading the capacitors) and the conversion time is programmable and
can so be adjusted to the external circuitry.
Overrun error detection/protection is provided for the conversion result register
(ADDAT): either an interrupt request will be generated when the result of a previous
conversion has not been read from the result register at the time the next conversion is
complete, or the next conversion is suspended in such a case until the previous result
has been read.
For applications which require less than 24 analog input channels, the remaining
channel inputs can be used as digital input port pins.
The A/D converter of the C167CS supports four different conversion modes. In the
standard Single Channel conversion mode, the analog level on a specified channel is
sampled once and converted to a digital result. In the Single Channel Continuous mode,
the analog level on a specified channel is repeatedly sampled and converted without
software intervention. In the Auto Scan mode, the analog levels on a prespecified
number of channels (standard or extension) are sequentially sampled and converted. In
the Auto Scan Continuous mode, the number of prespecified channels is repeatedly
sampled and converted. In addition, the conversion of a specific channel can be inserted
(injected) into a running sequence without disturbing this sequence. This is called
Channel Injection Mode.
The Peripheral Event Controller (PEC) may be used to automatically store the
conversion results into a table in memory for later evaluation, without requiring the
overhead of entering and exiting interrupt routines for each data transfer.
After each reset and also during normal operation the ADC automatically performs
calibration cycles. This automatic self-calibration constantly adjusts the converter to
changing operating conditions (e.g. temperature) and compensates process variations.
These calibration cycles are part of the conversion cycle, so they do not affect the normal
operation of the A/D converter.
In order to decouple analog inputs from digital noise and to avoid input trigger noise
those pins used for analog input can be disconnected from the digital IO or input stages
under software control. This can be selected for each pin separately via registers
P5DIDIS (Port 5 Digital Input Disable) and P1DIDIS (PORT1 Digital Input Disable).
相關PDF資料
PDF描述
SAB-C167SR-LM 16-Bit CMOS Single-Chip Microcontroller
SAK-C505L 8-bit CMOS Microcontroller
SAF-C505L-4EM 8-bit CMOS Microcontroller
SAB-C505 8-bit CMOS Microcontroller
SAF-C505L 8-bit CMOS Microcontroller
相關代理商/技術參數
參數描述
SABC167CRLM HA+ 制造商:Infineon Technologies AG 功能描述:
SAB-C167CR-LM HA+ 功能描述:16位微控制器 - MCU 16BIT ROM/ROMLESS RoHS:否 制造商:Texas Instruments 核心:RISC 處理器系列:MSP430FR572x 數據總線寬度:16 bit 最大時鐘頻率:24 MHz 程序存儲器大小:8 KB 數據 RAM 大小:1 KB 片上 ADC:Yes 工作電源電壓:2 V to 3.6 V 工作溫度范圍:- 40 C to + 85 C 封裝 / 箱體:VQFN-40 安裝風格:SMD/SMT
SABC167CRLM HA+TR 制造商:Infineon Technologies AG 功能描述:
SAB-C167CR-LMBA 制造商:Siemens 功能描述:Part Number Only
SAB-C167CR-LMGA 制造商:Infineon Technologies AG 功能描述:16-BIT, MROM, 25 MHZ, MICROCONTROLLER, PQFP144
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*