參數資料
型號： SAA8116ET
廠商： NXP SEMICONDUCTORS
元件分類： 消費家電
英文描述： Digital PC-camera signal processor including microcontroller and USB interface
中文描述： SPECIALTY CONSUMER CIRCUIT, PBGA112
封裝： 7 X 7 MM, 0.80 MM HEIGHT, PLASTIC, MO-195, SOT-630-1, TFBGA-112
文件頁數： 43/60頁
文件大小： 237K
代理商： SAA8116ET
2001 May 04
43
Philips Semiconductors
Product specification
Digital PC-camera signal processor including
microcontroller and USB interface
SAA8116
USB registers
A first MOVX@DPTR instruction enables module selection (via DPH) and command transmission. A second MOVX
communicates the data (read or write).
Table 49
Register list
Notes
1.
The GET_FRAMENUMBER command returns the frame number of the last received Start Of Frame (SOF). The
frame number is 11 bits wide; therefore two consecutive reads are needed to get the complete value. The first byte
provides the LSBs; the second byte (bits 0 to 2) provides the 3 MSBs. Note: it is possible to read the first byte only.
The GET_CHIPID command is followed by two reads since the chip identification is 16 bits wide (see Tables 55
and 56).
The RW_DATA command can be followed by up to ‘n + 2’ bytes read or write (n is the number of data bytes in the
selected EP buffer). With read, it returns the contents of the selected EP data buffer. With write, it loads the data
buffer of the selected EP.
2.
3.
ADDRESS
NAME
FUNCTION
FORMAT
Write registers
208 0xD0H SET_ADDRESS
216 0xD8H SET_EP_ENABLE
243 0xF3H GETSET_MODE
Read registers
0
0x00H SELECT_EP0_out
1
0x01H SELECT_EP0_in
2
0x02H SELECT_EP1_OUT
3
0x03H SELECT_EP1_IN
4
0x04H SELECT_EP2
5
0x05H SELECT_EP3
242 0xF2H SET_BUFFER_FE
244 0xF4H GET_INTERRUPT
245 0xF5H GET_FRAMENUMBER
250 0xFAH VALIDATE_BUFFER
253 0xFDH GET_CHIPID
Read/write registers
64
0x40H SELECT_EP0_OUT_STATUS select EP; clear interrupt and get information of EP 0
(out)
65
0x41H SELECT_EP0_IN_STATUS
select EP; clear interrupt and get information of EP 0 (in) byte
66
0x42H SELECT_EP1_OUT_STATUS select EP; clear interrupt and get information of EP 1
(out)
67
0x43H SELECT_EP1_IN_STATUS
select EP; clear interrupt and get information of EP 1 (in) byte
68
0x44H SELECT_EP2_STATUS
select EP; clear interrupt and get information of EP 2
69
0x45H SELECT_EP3_STATUS
select EP; clear interrupt and get information of EP 3
70
0x46H SELECT_EP4_STATUS
clear interrupt and get information of EP 4
71
0x47H SELECT_EP5_STATUS
get information of EP 5
240 0xF0H RW_DATA
read selected EP buffer
254 0xFEH GETSET_DEVICE_STATUS
set device status
set address
set EP enable
set mode
see Table 50
see Table 51
see Table 52
select EP 0 out
select EP 0 in
select EP 1 out
select EP 1 in
select EP 2
select EP 3
clear selected EP buffer
read interrupt register
read current frame number
validate selected EP
read chip identifier
see Table 53
see Table 53
see Table 53
see Table 53
see Table 53
see Table 53
byte
see Table 54
note 1
byte
note 2
byte
byte
byte
byte
byte
byte
note 3
byte
相關PDF資料
PDF描述
SAA8116HL Digital PC-camera signal processor, microcontroller andUSB interface
SAA8116 Digital PC-camera signal processor including microcontroller and USB interface
SAA8117HL REFLECTIVE PHOTOSENSOR SMD
SAA8200HL Ensation Base integrated wireless audio baseband
SAA9042 Teletext Circuit
相關代理商/技術參數
參數描述
SAA8116HL 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Digital PC-camera signal processor, microcontroller andUSB interface
SAA8116HL/C104,518 功能描述:數字信號處理器和控制器 - DSP, DSC PC WEB CAMERA DSP WITH USB RoHS:否 制造商:Microchip Technology 核心:dsPIC 數據總線寬度:16 bit 程序存儲器大小:16 KB 數據 RAM 大小:2 KB 最大時鐘頻率:40 MHz 可編程輸入/輸出端數量:35 定時器數量:3 設備每秒兆指令數:50 MIPs 工作電源電壓:3.3 V 最大工作溫度:+ 85 C 封裝 / 箱體:TQFP-44 安裝風格:SMD/SMT
SAA8116HL/C104,551 功能描述:數字信號處理器和控制器 - DSP, DSC PC WEB CAMERA DSP WITH USB RoHS:否 制造商:Microchip Technology 核心:dsPIC 數據總線寬度:16 bit 程序存儲器大小:16 KB 數據 RAM 大小:2 KB 最大時鐘頻率:40 MHz 可編程輸入/輸出端數量:35 定時器數量:3 設備每秒兆指令數:50 MIPs 工作電源電壓:3.3 V 最大工作溫度:+ 85 C 封裝 / 箱體:TQFP-44 安裝風格:SMD/SMT
SAA8116HL/C104,557 功能描述:數字信號處理器和控制器 - DSP, DSC PC WEB CAMERA DSP WITH USB RoHS:否 制造商:Microchip Technology 核心:dsPIC 數據總線寬度:16 bit 程序存儲器大小:16 KB 數據 RAM 大小:2 KB 最大時鐘頻率:40 MHz 可編程輸入/輸出端數量:35 定時器數量:3 設備每秒兆指令數:50 MIPs 工作電源電壓:3.3 V 最大工作溫度:+ 85 C 封裝 / 箱體:TQFP-44 安裝風格:SMD/SMT
SAA8117HL 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Digital camera USB interface IC
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*