參數資料
型號： S80C32-40:R
廠商： TEMIC SEMICONDUCTORS
元件分類： 微控制器/微處理器
英文描述： 8-BIT, 40 MHz, MICROCONTROLLER, PQCC44
文件頁數： 70/109頁
文件大?。?/td> 10824K
49
ATtiny20 [DATASHEET]
8235E–AVR–03/2013
The illustration in the figure above serves as a generic description applicable to all port pins in the AVR microcontroller
family. Some overriding signals may not be present in all port pins.
Table 10-2 summarizes the function of the overriding signals. The pin and port indexes from Figure 10-6 on page 48 are
not shown in the succeeding tables. The overriding signals are generated internally in the modules having the alternate
function.
Table 10-2. Generic Description of Overriding Signals for Alternate Functions
The following subsections shortly describe the alternate functions for each port, and relate the overriding signals to the
alternate function. Refer to the alternate function description for further details.
10.3.1 Alternate Functions of Port A
The Port A pins with alternate function are shown in Table 10-3.
Signal Name
Full Name
Description
PUOE
Pull-up Override
Enable
If this signal is set, the pull-up enable is controlled by the PUOV signal. If
this signal is cleared, the pull-up is enabled when PUExn = 0b1.
PUOV
Pull-up Override Value
If PUOE is set, the pull-up is enabled/disabled when PUOV is set/cleared,
regardless of the setting of the PUExn Register bit.
DDOE
Data Direction Override
Enable
If this signal is set, the Output Driver Enable is controlled by the DDOV
signal. If this signal is cleared, the Output driver is enabled by the DDxn
Register bit.
DDOV
Data Direction Override
Value
If DDOE is set, the Output Driver is enabled/disabled when DDOV is
set/cleared, regardless of the setting of the DDxn Register bit.
PVOE
Port Value Override
Enable
If this signal is set and the Output Driver is enabled, the port value is
controlled by the PVOV signal. If PVOE is cleared, and the Output Driver is
enabled, the port Value is controlled by the PORTxn Register bit.
PVOV
Port Value Override
Value
If PVOE is set, the port value is set to PVOV, regardless of the setting of the
PORTxn Register bit.
PTOE
Port Toggle Override
Enable
If PTOE is set, the PORTxn Register bit is inverted.
DIEOE
Digital Input Enable
Override Enable
If this bit is set, the Digital Input Enable is controlled by the DIEOV signal. If
this signal is cleared, the Digital Input Enable is determined by MCU state
(Normal mode, sleep mode).
DIEOV
Digital Input Enable
Override Value
If DIEOE is set, the Digital Input is enabled/disabled when DIEOV is
set/cleared, regardless of the MCU state (Normal mode, sleep mode).
DI
Digital Input
This is the Digital Input to alternate functions. In the figure, the signal is
connected to the output of the schmitt-trigger but before the synchronizer.
Unless the Digital Input is used as a clock source, the module with the
alternate function will use its own synchronizer.
AIO
Analog Input/Output
This is the Analog Input/Output to/from alternate functions. The signal is
connected directly to the pad, and can be used bi-directionally.
相關PDF資料
PDF描述
S80C52EXXX-30:D 8-BIT, MROM, 30 MHz, MICROCONTROLLER, PQCC44
SC80C52XXX-36/883 8-BIT, MROM, 36 MHz, MICROCONTROLLER, CDIP40
S83C154TXXX-25 8-BIT, MROM, 25 MHz, MICROCONTROLLER, PQCC44
S83C154XXX-25R 8-BIT, MROM, 25 MHz, MICROCONTROLLER, PQCC44
SC80C32XXX-36SV 8-BIT, 36 MHz, MICROCONTROLLER, CDIP40
相關代理商/技術參數
參數描述
S80C32-42 制造商:未知廠家 制造商全稱:未知廠家 功能描述:8-Bit Microcontroller
S80C32-42R 制造商:未知廠家 制造商全稱:未知廠家 功能描述:8-Bit Microcontroller
S80C32-44 制造商:未知廠家 制造商全稱:未知廠家 功能描述:8-Bit Microcontroller
S80C32-44R 制造商:未知廠家 制造商全稱:未知廠家 功能描述:8-Bit Microcontroller
S80C32-L16 制造商:未知廠家 制造商全稱:未知廠家 功能描述:8-Bit Microcontroller
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*