308
SAM9X25 [DATASHEET]
11054E–ATARM–10-Mar-2014
In most cases this feature is not needed and should be disabled for power saving.
Warning: This feature cannot prevent any slave from locking its access indefinitely.
25.5.2 Arbitration Priority Scheme
The bus Matrix arbitration scheme is organized in priority pools.
Round-robin priority is used in the highest and lowest priority pools, whereas fixed level priority is used between priority
pools and in the intermediate priority pools.
For each slave, each master is assigned to one of the slave priority pools through the priority registers for slaves (MxPR
fields of MATRIX_PRAS and MATRIX_PRBS). When evaluating master requests, this programmed priority level always
takes precedence.
After reset, all the masters belong to the lowest priority pool (MxPR = 0) and are therefore granted bus access in a true
round-robin order.
The highest priority pool must be specifically reserved for masters requiring very low access latency. If more than one
master belongs to this pool, they will be granted bus access in a biased round-robin manner which allows tight and
deterministic maximum access latency from AHB bus requests. At worst, any currently occurring high-priority master
request will be granted after the current bus master access has ended and other high priority pool master requests, if
any, have been granted once each.
The lowest priority pool shares the remaining bus bandwidth between AHB Masters.
Intermediate priority pools allow fine priority tuning. Typically, a moderately latency-critical master or a bandwidth-only
critical master will use such a priority level. The higher the priority level (MxPR value), the higher the master priority.
All combinations of MxPR values are allowed for all masters and slaves. For example some masters might be assigned
to the highest priority pool (round-robin) and the remaining masters to the lowest priority pool (round-robin), with no
master for intermediate fix priority levels.
If more than one master requests the slave bus, irregardless of the respective masters priorities, no master will be
granted the slave bus for two consecutive runs. A master can only get back-to-back grants so long as it is the only
requesting master.
25.5.2.1 Fixed Priority Arbitration
Fixed priority arbitration algorithm is the first and only arbitration algorithm applied between masters from distinct priority
pools. It is also used in priority pools other than the highest and lowest priority pools (intermediate priority pools).
Fixed priority arbitration allows the Bus Matrix arbiters to dispatch the requests from different masters to the same slave
by using the fixed priority defined by the user in the MxPR field for each master in the Priority Registers, MATRIX_PRAS
and MATRIX_PRBS. If two or more master requests are active at the same time, the master with the highest priority
MxPR number is serviced first.
In intermediate priority pools, if two or more master requests with the same priority are active at the same time, the
master with the highest number is serviced first.
25.5.2.2 Round-Robin Arbitration
This algorithm is only used in the highest and lowest priority pools. It allows the Bus Matrix arbiters to properly dispatch
requests from different masters to the same slave. If two or more master requests are active at the same time in the
priority pool, they are serviced in a round-robin increasing master number order.