
S7986-01 and S7987-01 are a family of FT-CCD area image sensors specifically designed for high speed operation. A high frame rate is attained
by employing a wide band width on-chip amplifier. In area scan operation, S7986-01 and S7987-01 can be used as a high frame rate camera, and
2/3-inch NTSC B/W TV correspondence. S7986-01 and S7987-01 also feature low dark signal (MPP mode operation). S7986-01 and S7987-01
have an effective pixel size of 14 × 14 μm and is available in image areas of 9.212 (H) × 6.860 (V) mm.
One-stage peltier cooler is built into the package for thermoelectric cooling (S7987-01). At room temperature operation, the device can be cooled
down to -10 C (Typ.) without using any other cooling technique. In addition, since both the CCD chip and the peltier cooler are hermetically
sealed, no dry air is required, thus allowing easy handling.
Features
Applications
I M A G E S E N S O R
CCD area image sensor
S7986-01, S7987-01
Back-thinned FT-CCD for low-light-level NTSC B/W TV application
I
Selection and order guide
Type No.
Cooling
Number of
total pixels
Number of
active pixels
Active area
[mm (H) × mm (V)]
S7986-01
S7987-01
Non-cooled
One-stage TE-cooled
680 × 500
658 × 490
9.212 × 6.860
I
General ratings
Parameter
Specification
CCD structure
Fill factor
Number of active pixels
Pixel size
Active area
Vertical clock phase
Horizontal clock phase
Output circuit
Package
Frame transfer (2/3-inch NTSC B/W TV correspondence)
100 %
658 (H) × 490 (V)
14 (H) × 14 (V) μm
9.212 (H) × 6.860 (V) mm
2 phase
2 phase
Two-stage MOSFET source follower
24 pin ceramic package
Sapphire glass
Temporary window are available upon request
Window
G
High-speed on-chip amplifier
(14 MHz, 2/3-inch NTSC B/W TV correspondence)
G
Greater than 90 % quantum efficiency
G
Wide spectrum range
G
Built-in TE-cooler
G
MPP operation
G
Non-cooled types: S7986-01
One-stage TE-cooled types: S7987-01
(Two-stage TE-cooled types are optional)
G
High-speed UV imaging
G
Semiconductor inspection
G
Microscope
1