- 您現在的位置：買賣IC網 > PDF目錄373350 > S494P (AUK Corp) Pulse Width Modulation PDF資料下載
參數資料
| 型號： | S494P |
| 廠商： | AUK Corp |
| 英文描述： | Pulse Width Modulation |
| 中文描述： | 脈寬調制 |
| 文件頁數： | 5/8頁 |
| 文件大?。?/td> | 342K |
| 代理商： | S494P |
KSI-L010-000
5
S494P
INFORMATION
The basic oscillator(switching)frequency is controlled by an external resistor (Rt) and
capacitor(Ct). The relationship between the values of Rt Ct and frequency is shown in.
The level of the sawtooth wave form is compared with an error voltage by the pulse width
modulated comparator. The output of the PWM Comparator directs the pulse steering flip
flop and the output control logic.
The error voltage is generated by the error amplifier. The error amplifier boosts the voltage
difference between the output and the 5V internal reference. See Figure 7 for error amp
sensing techniques. The second error amp is typically used to implement current limiting.
The output control logic (Pin13) selects either push-pull or single-ended operation of the
output transistors (see Figure6). The dead time control prevents on-state overlap of the
output transistors as can be seen is Figure5. The dead time is approximately 3 to 5% of the
total period if the dead time control(pin4) is grounded. This dead time can be increased by
connecting the dead time control to a voltage up to 5 V. The frequency response of the
error amps can be modified by using external resistors and capacitors. These components
are typically connected between the compensation terminal (pin3) and the inverting input
of the error amps(pin2 or pin15). The switching frequency of two or more S494 circuits can
be synchronized. The timing capacitor, Ct is connected as shown in Figure 8. Charging
current is provided by the master circuit. Discharging is through all the circuits slaved to
the master. Rt is required only for the master circuit.
Operating Waveform
相關PDF資料 |
PDF描述 |
|---|---|
| S494 | Pulse Width Modulation |
| S4B-EH | Disconnectable Crimp style connectors |
| S5052 | Si PIN photodiode |
| S5573 | MOSFET, Switching; VDSS (V): 600; ID (A): 30; Pch : 200; RDS (ON) typ. (ohm) @10V: 0.2; RDS (ON) typ. (ohm) @4V[4.5V]: -; RDS (ON) typ. (ohm) @2.5V: -; Ciss (pF) typ: 4100; toff (µs) typ: 0.14; Package: TO-3P |
| S5106 | Si PIN photodiode Chip carrier package for surface mount |
相關代理商/技術參數 |
參數描述 |
|---|---|
| S494P_1 | 制造商:AUK 制造商全稱:AUK corp 功能描述:Pulse Width Modulation |
| S4951 | 制造商:BOTHHAND 制造商全稱:Bothhand USA, LP. 功能描述:T1/CEPT/ISDN-PRI TRANSFORMER |
| S4952 | 制造商:BOTHHAND 制造商全稱:Bothhand USA, LP. 功能描述:T1/CEPT/ISDN-PRI TRANSFORMER |
| S4953 | 制造商:BOTHHAND 制造商全稱:Bothhand USA, LP. 功能描述:T1/CEPT/ISDN-PRI TRANSFORMER |
| S4954 | 制造商:BOTHHAND 制造商全稱:Bothhand USA, LP. 功能描述:T1/CEPT/ISDN-PRI TRANSFORMER |
發布緊急采購，3分鐘左右您將得到回復。