
April 30, 2004 S29GLxxxM_00A5
S29GLxxxM MirrorBit
TM
 Flash Family
121
P r e l i m i n a r y
ABSOLUTE MAXIMUM RATINGS
Storage Temperature, Plastic Packages. . . . . . . . . . . . . . . . –65°C to +150°C
Ambient Temperature with Power Applied . . . . . . . . . . . . . . –65°C to +125°C
Voltage with Respect to Ground:
V
CC
 (Note 1). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .–0.5 V to +4.0 V
 . . . . . . . . . . . . A9, OE#, ACC and RESET# (Note 2)–0.5 V to +12.5 V
All other pins (Note 1). . . . . . . . . . . . . . . . . . . . . –0.5 V to V
CC
+0.5 V
Output Short Circuit Current (Note 3). . . . . . . . . . . . . . . . . . . . . . . . 200 mA
Notes:
1. Minimum DC voltage on input or I/Os is –0.5 V. During voltage transitions, inputs 
or I/Os may overshoot V
SS
 to –2.0 V for periods of up to 20 ns. See 
Figure 9
. 
Maximum DC voltage on input or I/Os is V
CC
 + 0.5 V. During voltage transitions, 
input or I/O pins may overshoot to V
CC
 + 2.0 V for periods up to 20 ns. See 
Figure 
10
.
2. Minimum DC input voltage on pins A9, OE#, ACC, and RESET# is –0.5 V. During 
voltage transitions, A9, OE#, ACC, and RESET# may overshoot V
SS
 to –2.0 V for 
periods of up to 20 ns. See 
Figure 9
. Maximum DC input voltage on pin A9, OE#, 
ACC, and RESET# is +12.5 V which may overshoot to +14.0V for periods up to 20 
ns.
3. No more than one output may be shorted to ground at a time. Duration of the short 
circuit should not be greater than one second. 
4. Stresses above those listed under “Absolute Maximum Ratings” may cause 
permanent damage to the device. This is a stress rating only; functional operation 
of the device at these or any other conditions above those indicated in the 
operational sections of this data sheet is not implied. Exposure of the device to 
absolute maximum rating conditions for extended periods may affect device 
reliability.
Operating Ranges
Industrial (I) Devices
Ambient Temperature (T
A
)  . . . . . . . . . . . . . . . . . . . . . . . . . –40°C to +85°C
Supply Voltages
V
CC
 for full voltage range . . . . . . . . . . . . . . . . . . . . . . . . . +2.7 V to +3.6 V
V
CC
 for regulated voltage range. . . . . . . . . . . . . . . . . . . . .  +3.0 V to +3.6 V
V
IO
 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V
CC
Notes:
1. Operating ranges define those limits between which the functionality of the device is guaranteed. 
Figure 9. Maximum Negative 
Overshoot Waveform
Figure 10. Maximum Positive 
Overshoot Waveform
20 ns
20 ns
+0.8 V
–0.5 V
20 ns
–2.0 V
20 ns
20 ns
V
+2.0 V
V
+0.5 V
20 ns
2.0 V