Si photodiode
S2592/S3477 series
HAMAMATSU PHOTONICS K.K., Solid State Division
1126-1 Ichino-cho,
Higashi-ku,
Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184, www.hamamatsu.com
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 08152-3750, Fax: (49) 08152-2658
France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777
North Europe: Hamamatsu Photonics Norden AB: Smidesv
gen 12, SE-171 41 Solna, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01
Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions.
Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. 200
6
Hamamatsu Photonics K.K.
32
60
(4
×
) 3.5
3
3
0.4
±
0.3 *
1
Weight: 50 g approx.
32.6
40
PHOTOSENSITIVE
*
2
DETECTOR
METAL PACKAGE
*1: When detector element is installed.
*2: The position of the photosensitive
surface differs according to the
detector element used.
Refer to the dimensional outline for
the detector.
BOTTOM SURFACE
(REFERENCE POINT) OF
DETECTOR METAL PACKAGE
Cat. No. KSPD1003E06
Aug. 2006 DN
By adjusting the current flowing through the thermoelectric cooler in a one-
stage or two-stage thermoelectrically cooled detector, C1103-04 maintains the
detector element at a constant temperature. The cooling temperature can be
easily set by using the control knob on the front panel.
I
Accessories
Instruction manual
4-conductor cable (with a connector) A4372-05
I
Specifications (common)
Setting element temperature
Applicable detectors
Temperature stability
Temperature control output current
Power supply
Power consumption
Dimensions and weight
Operating temperature
Operating humidity
Storage temperature
* Power requirement (AC line voltage) can be selected from among 100 V,
115 V and 230 V at the factory prior to shipping.
-30 to +20 °C
One-stage or two-stage thermoelectrically cooled detectors
Within ±0.1 °C
1.2 A Max.
100 V ± 10 %
50/60 Hz *
30 VA
108 (W) × 87 (H) × 190 (D) mm/1.9 kg approx.
+10 to +40 °C
Equal to or less than 90 %
+10 to +40 °C
I
Block diagram
KACCC0143EA
KOTHC0005EA
C1103-04 conforms to European EMC direc-
tives (89/336/EEC) and LVD (73/23/EEC).
TE-COOLED
DETECTOR
THERMISTOR
TE-COOLED DETECTOR
COMPARATOR
C1103-04
AMP CIRCUIT
CURRENT
CIRCUIT
POWER
SUPPLY
AC INPUT
A3179 series heatsinks are designed for thermoelectrically cooled detectors having a 6-pin TO-8 package. Heat dissipation
capacity for A3179 is about 35 °C versus the ambient temperature 25 °C.
I
Dimensional outlines (unit: mm)
Heatsink for TE-cooled detector (TO-8 package)
A3179
Temperature controller for TE-cooled detector
C1103-04
KIRDA0018EB
4