- 您現在的位置：買賣IC網 > PDF目錄374645 > S1352 (Electronic Theatre Controls, Inc.) POSITION SENSITIVE DETECTOR PDF資料下載
參數資料
| 型號： | S1352 |
| 廠商： | Electronic Theatre Controls, Inc. |
| 英文描述： | POSITION SENSITIVE DETECTOR |
| 中文描述： | 位置靈敏探測器 |
| 文件頁數： | 13/16頁 |
| 文件大?。?/td> | 1289K |
| 代理商： | S1352 |
10
Figure 6-1 Response wavelength example of PSD
KPSDC0078EB
2) Diffusion time t
2
of carriers generated outside the deple-
tion layer
Carriers are also generated outside the depletion layer
when light is absorbed in the PSD chip surrounding areas
outside the active area or at locations deeper than the de-
pletion layer in the substrate. These carriers diffuse through
the substrate and are extracted as an output. The time t
2
required for these carriers to diffuse may be more than sev-
eral microseconds.
The equation below gives the approximate rise time tr of a
PSD. Figure 6-1 shows typical output waveforms in re-
sponse to stepped light input.
Figure 6-2 shows the relation between the rise time and re-
verse voltage measured at different wavelengths. The rise
time can be reduced by increasing the reverse voltage and
using a light beam of shorter wavelengths. Selecting a PSD
with a small Rie is also effective in improving the rise time.
Figure 6-2 Rise time vs. reverse voltage (S4583-06)
A method for integrating position signals can be used when
detecting pulsed light having a pulse width shorter than the
PSD rise time.
Characteristic and use
6. Response speed
As with photodiodes, the response speed of PSD is the
time required for the generated carriers to be extracted as
current by an external circuit. This is generally expressed
as the rise time tr and is an important parameter when de-
tecting a spot light traveling over the active surface at high
speeds or using pulse-modulated light for subtracting the
background light. The rise time is defined as the time need-
ed for the output signal to rise from 10 to 90 % of its peak
value and is chiefly determined by the following two factors.
1) Time constant t
1
determined by the interelectrode resist-
ance, load resistance and terminal capacitance
The interelectrode resistance Rie of PSD basically acts as
load resistance R
L
, so the time constant t
1
is given by the
interelectrode resistance Rie and terminal capacitance Ct,
as follows:
t
1
= 2.2 . Ct . (Rie + R
L
) ......... (6-1)
The rise time listed in our PSD datasheets is measured
with a spot light striking the center of the active area with
the interelectrode resistance Rie distributed between the
electrodes. So the time constant t
1
is as follows:
t
1
= 0.5 . Ct . (Rie + R
L
) ......... (6-2)
KPSDB0110EA
REVERSE VOLTAGE (V)
(Typ. Ta=25
C)
R
1
0.1
0
10
8
6
4
2
10
100
l
=890 nm
l
=650 nm
t
12
+ t
22
.................... (6-3)
tr
LIGHT INPUT
OUTPUT WAVEFORM
(t
1
>>t
2
)
OUTPUT WAVEFORM
(t
2
>>t
1
)
相關PDF資料 |
PDF描述 |
|---|---|
| S1200 | POSITION SENSITIVE DETECTOR |
| S19201 | SONET/SDH/ATM OC-48 Transceiver With CDR |
| S19203 | STS-192 SONET/SDH/FEC/GbE/FC 16-bit Transceiver with EDC |
| S19204 | STS-192 SONET/SDH/FEC/GbE/FC 16-bit Transceiver with EDC |
| S19227 | STS-192 SONET/SDH/FEC/GbE/FC 16-bit Transceiver with EDC |
相關代理商/技術參數 |
參數描述 |
|---|---|
| S1355 | 制造商:NGC 功能描述: |
| S1359-M14-H | 制造商:UNICORP 功能描述: |
| S135A | 制造商:Bogen Communications 功能描述:HIGH POWERED INTERCOM CABINET 25 STATION, EXPANDABLE TO 75 STATION |
| S136-000 | 功能描述:TERMINATOR SCSI EXTERNAL 68POS RoHS:是 類別:連接器，互連式 >> D-Sub，D 形 - 端接器 系列:- 標準包裝:1 系列:- 連接器類型:VHDCI，中央帶觸點 位置數:68 類型:有源，單端 安裝特點:外部 樣式:SCSI U2/U160 LVD 特點:插孔式螺絲 |
| S-1360B | 功能描述:集管和線殼 Obsolete RoHS:否 產品種類:1.0MM Rectangular Connectors 產品類型:Headers - Pin Strip 系列:DF50 觸點類型:Pin (Male) 節距:1 mm 位置/觸點數量:16 排數:1 安裝風格:SMD/SMT 安裝角:Right 端接類型:Solder 外殼材料:Liquid Crystal Polymer (LCP) 觸點材料:Brass 觸點電鍍:Gold 制造商:Hirose Connector |
發布緊急采購，3分鐘左右您將得到回復。