- 您現在的位置：買賣IC網 > PDF目錄225064 > RP-21203F3-870 (DATA DEVICE CORP) SPECIALTY ANALOG CIRCUIT, PDSS20 PDF資料下載
參數資料
| 型號： | RP-21203F3-870 |
| 廠商： | DATA DEVICE CORP |
| 元件分類： | 模擬信號調理 |
| 英文描述： | SPECIALTY ANALOG CIRCUIT, PDSS20 |
| 封裝： | FP-20 |
| 文件頁數： | 16/20頁 |
| 文件大?。?/td> | 335K |
| 代理商： | RP-21203F3-870 |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁當前第16頁第17頁第18頁第19頁第20頁
5
Data Device Corporation
www.ddc-web.com
RP-21200
Rev. C
Control Command
Lockout Command
BiasGnd
100K
BiasGnd
RP-212XX
R
Vbias
FIGURE 2. RP-212XX SERIES CONTROL/LOCKOUT
FUNCTIONAL SCHEMATIC
RP-212XX
I
3
2
Current Range Programming
Load Detection Programming
Instant Trip Programming
Program Reference
R
1
2
3
FIGURE 3. RP-212XX SERIES PROGRAMMING
CONNECTIONS
Internal preset programming options
A hot wire cannot withstand as great an overload as a cool wire.
The
STAR Series of SSPCs incorporate ‘Thermal Memory’ to
protect a wire that is hot from a previous overload.
The Instant Trip Characteristic ranges shown in FIGURE 5 are pro-
grammable as detailed in FIGURE 4. If the overload exceeds the
upper Instant Trip level, the SSPC will trip regardless of the dura-
tion of the overload. The main reason for an Instant Trip level is to
protect the switch from excessive short-term power dissipation but
can be programmed for system considerations, if necessary.
The RP-21200
STAR Series are available in three current
ranges. As shown in TABLE 5, they are programmable over a
three-to-one range. The ranges are: 1 - 3 Amps, 3 - 9 Amps and
8.3 to 25 Amps. TABLE 4 shows the Maximum “on” resistance
and voltage drops over the temperature range.
The rise and fall times of the output voltage are controlled to be
approximately 500S. Fast rise times minimize the power dissi-
pation in the switch during turn-on and turn-off. Slow rise times
minimize EMI, voltage spiking due to line inductance and allow
starting up into higher capacitive loads. The 500S rise and fall
times in the
STAR Series represent a compromise. While the
switch can handle the power dissipation during occasional
changes of state, rapidly switching the SSPC on and off will lead
to overheating. These SSPCs should not be cycled at greater
than a 30ms rate.
To control the rise and fall time, the Slew Control Input must be
returned to Chassis Ground. The load return is the ideal Chassis
Ground; the Chassis Ground can also be used as a ground but,
if there is noise between Chassis Ground and load return, some
of this noise may appear on the output. An alternative Chassis
Ground is the Power In but, if the Power In is turned on abruptly,
such as through a switch or contactor, the output may exhibit a
small transient although the SSPC is commanded off.
APPLICATIONS INFORMATION
PROGRAMMING OVERVIEW
The three standard programmable devices of the RP-212XX
STAR Series are the RP-21203 (1-3 amp), RP-21209 (3-9 amp),
and RP-21225 (8-25 amp). Each supports a 3:1 current rating
range. Please refer to FIGURE 3 (RP-212XX Series Programming
MIN. RATED CURRENT
MAX. RATED CURRENT
PART
NUMBER
“ON”
RESISTANCE
(OHMS)
VOLTAGE
DROP
(V)
POWER
DISSIPATION
(W)
VOLTAGE
DROP
(V)
POWER
DISSIPATION
(W)
RP-21203
0.100
0.1
0.25
0.3
1.05
RP-21209
0.033
0.1
0.45
0.3
2.85
RP-21225
0.012
0.1
0.98
0.3
7.65
TABLE 4. POWER DISSIPATION
TABLE 4 notes:
1. Values shown are maximum over the case temperature range of -55°C to +100°C; typical values at
25°C are typically 67% of the maximums shown above.
2. Voltage drop is approximately 0.6% per °C improved below the100°C limit.
3. Power Dissipation data includes 150 mW contribution of VBIAS, but doesn’t include the analog current
monitor (see TABLE 3). “F1” is another 45 mA maximum.
相關PDF資料 |
PDF描述 |
|---|---|
| RP-21203G2-220 | SPECIALTY ANALOG CIRCUIT, XMA |
| RP100K121B5-TR | 1.2 V FIXED POSITIVE LDO REGULATOR, PDSO4 |
| RP100K121D5-TR | 1.2 V FIXED POSITIVE LDO REGULATOR, PDSO4 |
| RP100K241B-TR | 2.4 V FIXED POSITIVE LDO REGULATOR, PDSO4 |
| RP100K241D-TR | 2.4 V FIXED POSITIVE LDO REGULATOR, PDSO4 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| RP-21203XX | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:POWER CONTROLLERS|Rad Hard Hybrid. True I2t Protection |
| RP-21209XX | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:POWER CONTROLLERS|STAR Series Programmable. Low Cost. EMI Tolerant Module |
| RP-21225XX | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:POWER CONTROLLERS|STAR Series Programmable. Low Cost. EMI Tolerant Module |
| RP220-10-4.7-QD | 制造商:RADIUS POWER 功能描述:EMI POWER LINE FILTER |
| RP220-16-4.7-QD | 制造商:RADIUS POWER 功能描述:EMI POWER LINE FILTER |
發布緊急采購，3分鐘左右您將得到回復。