
RO2113A-1
Denso Proprietary 151377-0070
314.0 MHz
SAW Resonator
RF Monolithics, Inc.
Phone: (972) 233-2903
Fax: (972) 387-8148
E-mail: info@rfm.com
Page 1 of 2
http://www.rfm.com
1998 by RF Monolithics, Inc. The stylized RFM logo and RFM are registered trademarks of RF Monolithics, Inc.
RO2113A-1-081398
Ideal for 314.0 MHz Transmitters
Very Low Series Resistance
Quartz Stability
Surface-Mount Ceramic Case with 21 mm2 Footprint
The RO2113A-1 is a one-port, surface-acoustic-wave (SAW) resonator in a surface-mount
ceramic case. It provides reliable, fundamental-mode, quartz frequency stabilization of
local oscillatiors operating at 314 MHz. Applications include automotive keyless entry
receivers operating in the USA under FCC Part 15 and in Canada under DoC RSS-210.
Electrical Characteristics
Characteristic
Sym
Notes
Minimum
Typical
Maximum
Units
Center Frequency at +25 °C
Absolute Frequency
fC
2, 3, 4, 5
313.950
314.050
MHz
Tolerance from 314.000 MHz
f
C
±50
kHz
Insertion Loss
IL
2, 5, 6
0.8
1.5
dB
Quality Factor
Unloaded Q
QU
5, 6, 7
18,200
50
Loaded Q
QL
1,500
Temperature Stability
Turnover Temperature
TO
6, 7, 8
10
25
40
°C
Turnover Frequency
fO
fC
Frequency Temperature Coefficient
FTC
0.032
ppm/°C2
Frequency Aging
Absolute Value during the First Year
|fA|
1
≤10
ppm/yr
DC Insulation Resistance between Any Two Terminals
5
1.0
M
RF Equivalent RLC Model
Motional Resistance
RM
5, 6, 7, 9
10
19
Motional Inductance
LM
80.9315
H
Motional Capacitance
CM
3.17441
fF
Shunt Static Capacitance
CO
5, 6, 7, 9
2.7
3.0
3.3
pF
Test Fixture Shunt Inductance
LTEST
2, 7
90
nH
Lid Symbolization (in Addition to to Lot and/or Date Code)
135
SM-2 Case
Notes:
1.
Lifetime (10 year) frequency aging.
2.
The center frequency, fC, is measured at the minimum insertion loss point,
ILMIN, with the resonator in the 50 test system (VSWR ≤ 1.2:1). The shunt
inductance, LTEST, is tuned for parallel resonance with CO at fC.
3.
One or more of the following United States patents apply: 4,454,488 and
4,616,197.
4.
Typically, equipment utilizing this device requires emissions testing and
government approval, which is the responsibility of the equipment manufac-
turer.
5.
Unless noted otherwise, case temperature TC = +25°C±2°C.
6.
The design, manufacturing process, and specifications of this device are
subject to change without notice.
7.
Derived mathematically from one or more of the following directly measured
parameters: fC, IL, 3 dB bandwidth, fC versus TC, and CO.
8.
Turnover temperature, TO, is the temperature of maximum (or turnover) fre-
quency, fO. The nominal frequency at any case temperature, TC, may be
calculated from: f= fO [1- FTC (TO -TC)
2].
9.
This equivalent RLC model approximates resonator performance near the
resonant frequency and is provided for reference only. The capacitance CO
is the static (nonmotional) capacitance between the two terminals measured
at low frequency (10 MHz) with a capacitance meter. The measurement
includes parasitic capacitance with ”NC” pads unconnected. Case parasitic
capacitance is approximately 0.05 pF. Transducer parallel capacitance can
by calculated as: CP ≈ CO - 0.05 pF.
Absolute Maximum Ratings
Rating
Value
Units
CW RF Power Dissipation
+0
dBm
DC Voltage Between Terminals
(Observe ESD Precautions)
±30
VDC
Case Temperature
-40 to +85
°C
Soldering Temperature
+250
°C
CAUTION: Electrostatic Sensitive Device. Observe precautions for handling.