
A- 2
27
Changed reset values “XXXX XXXXb” and “XXXX 000Xb” for
registers U3RB and U4RB in Table 4.9 to “XXXXh”
29
Changed expression of register name “Xi Register Yi Register” and
register symbol “XiR, YiR” in Table 4.11 to “Xi Register/Yi Register”
and “XiR/YiR”, respectively
34
Changed hexadecimal format of reset values for registers PD0 to
PD7, PD9, and PD10 in Table 4.16 to binary
38-40
Changed register name “Port Pi_j Port Function Select Register” in
Tables 4.20 to 4.22
to “Port Pi_j Function Select Register”
42
Changed register name “DMAi Request Source Select Register 1”
in Table 4.24 to “DMAi Request Source Select Register”
Changed register names “Wake-up/Interrupt Priority Level Control
Register 2” and “Wake-up/Interrupt Priority Level Control Register 1”
in Table 4.24 to “Wake-up IPL Setting Register 2” and “Wake-up IPL
Setting Register 1”, respectively
43
Modified “X” in reset values for unassigned bits to “0” for the
following registers in Table 4.25: LCW, LBRG, LMD0, LBRK, LSPC,
LRFC, LSC, LTC, LST, and LEST
59
Modified reset value “00h” for C0CLKR in Table 4.41 to “000X
0000b”
Chapter 5. Electrical Characteristics
—
Made minor text modifications to this chapter
61
Added description of dVcc/dt to Table 5.2
62
Added Note 2 to Table 5.3
63
Corrected a typo “pots” in line 2 of Note 2 for Table 5.4 to “ports”
67
Deleted specification of “tPS” from Table 5.8
68
Corrected a typo “32 Kbyte block” in Table 5.9 to “32 byte block”
Deleted the measurement condition from Table 5.10
69
Changed voltage condition for Table 5.12 from “Vcc = 3.0 to 5.5 V”
to “Vcc = 4.2 to 5.5 V”
Changed the following expressions in Table 5.13: “PLL frequency
synthesizer stabilization time” to “PLL lock time” and “tOSC(PLL)” to
“tLOCK(PLL)“; Added the measurement condition and Note 3 for
tLOCK(PLL)
Newly added two characteristics: “Lock detection” and “Unlock
detection” and Note 1
Changed maximum value for fSO(PLL) in Table 5.13 from “65” to “80”
70
Changed the order of description of trec(STOP) and trec(WAIT) in
Table 5.14 and Figure 5.4
73, 84
Deleted “P8_5” from “Characteristic” of “Pull-up resistor” in Tables
5.17 and 5.37
74, 85
Changed expression “Running” for “Measurement condition” in
Tables 5.18 and 5.38
to “Active”; Added “XIN” as “Active“ to first,
third, and sixth rows of respective tables
75
Modified expression “Sample time” for “Characteristics” in Table
5.19
to “Sampling time”
REVISION HISTORY
R32C/120 Group Datasheet
Rev.
Date
Description
Page
Summary