參數資料
型號: R5F21114DFP
廠商: Renesas Technology Corp.
英文描述: SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
中文描述: 單片16位CMOS微機
文件頁數: 28/29頁
文件大小: 275K
代理商: R5F21114DFP
Rev.1.40
Sep 30, 2004
page 8 of 26
REJ03B0034-0140Z
R8C/11 Group
2. Central Processing Unit (CPU)
2.2 Address Registers (A0 and A1)
The register A0 consists of 16 bits, and is used for address register indirect addressing and address
register relative addressing. They also are used for transfers and logic/logic operations. A1 is the same as A0.
In some instructions, registers A1 and A0 can be combined for use as a 32-bit address register (A1A0).
2.3 Frame Base Register (FB)
FB is configured with 16 bits, and is used for FB relative addressing.
2.4 Interrupt Table Register (INTB)
INTB is configured with 20 bits, indicating the start address of an interrupt vector table.
2.5 Program Counter (PC)
PC is configured with 20 bits, indicating the address of an instruction to be executed.
2.6 User Stack Pointer (USP) and Interrupt Stack Pointer (ISP)
Stack pointer (SP) comes in two types: USP and ISP, each configured with 16 bits.
Your desired type of stack pointer (USP or ISP) can be selected by the U flag of FLG.
2.7 Static Base Register (SB)
SB is configured with 16 bits, and is used for SB relative addressing.
2.8 Flag Register (FLG)
FLG consists of 11 bits, indicating the CPU status.
2.8.1 Carry Flag (C Flag)
This flag retains a carry, borrow, or shift-out bit that has occurred in the arithmetic/logic unit.
2.8.2 Debug Flag (D Flag)
The D flag is used exclusively for debugging purpose. During normal use, it must be set to “0”.
2.8.3 Zero Flag (Z Flag)
This flag is set to “1” when an arithmetic operation resulted in 0; otherwise, it is “0”.
2.8.4 Sign Flag (S Flag)
This flag is set to “1” when an arithmetic operation resulted in a negative value; otherwise, it is “0”.
2.8.5 Register Bank Select Flag (B Flag)
Register bank 0 is selected when this flag is “0” ; register bank 1 is selected when this flag is “1”.
2.8.6 Overflow Flag (O Flag)
This flag is set to “1” when the operation resulted in an overflow; otherwise, it is “0”.
2.8.7 Interrupt Enable Flag (I Flag)
This flag enables a maskable interrupt.
Maskable interrupts are disabled when the I flag is “0”, and are enabled when the I flag is “1”. The I
flag is cleared to “0” when the interrupt request is accepted.
2.8.8 Stack Pointer Select Flag (U Flag)
ISP is selected when the U flag is “0”; USP is selected when the U flag is “1”.
The U flag is cleared to “0” when a hardware interrupt request is accepted or an INT instruction for
software interrupt Nos. 0 to 31 is executed.
2.8.9 Processor Interrupt Priority Level (IPL)
IPL is configured with three bits, for specification of up to eight processor interrupt priority levels from
level 0 to level 7.
If a requested interrupt has priority greater than IPL, the interrupt is enabled.
2.8.10 Reserved Area
When write to this bit, write "0". When read, its content is indeterminate.
相關PDF資料
PDF描述
R5S72691P266BG 32-BIT, FLASH, 266.67 MHz, RISC MICROCONTROLLER, PBGA272
R5S72691P266FP 32-BIT, FLASH, 266.67 MHz, RISC MICROCONTROLLER, PQFP256
R6202230XXOO 300 A, 2200 V, SILICON, RECTIFIER DIODE
R8206-1 82 SERIES, 16-BIT ERROR DETECT AND CORRECT CKT, CQCC68
R8A66150SP 12 I/O, PIA-GENERAL PURPOSE, PDSO20
相關代理商/技術參數
參數描述
R5F21114DFP#U0 制造商:Renesas Electronics Corporation 功能描述:MCU 16-Bit R8C CISC 16KB Flash 3.3V/5V 32-Pin LQFP Tray 制造商:Renesas Electronics Corporation 功能描述:MCU 16BIT R8C CISC 16KB FLASH 3.3V/5V 32LQFP - Trays 制造商:Renesas Electronics Corporation 功能描述:IC R8C MCU FLASH 32LQFP 制造商:Renesas Electronics Corporation 功能描述:16BIT MCU FLASH 16K SMD LQFP32 制造商:Renesas Electronics Corporation 功能描述:IC SM 16-BIT MCU WAFFLE130 制造商:Renesas Electronics Corporation 功能描述:16BIT MCU FLASH 16K, SMD, LQFP32 制造商:Renesas 功能描述:MCU 16-Bit R8C CISC 16KB Flash 3.3V/5V 32-Pin LQFP Tray
R5F21114DFP#V0 功能描述:IC R8C MCU FLASH 32LQFP RoHS:是 類別:集成電路 (IC) >> 嵌入式 - 微控制器, 系列:R8C/1x/11 標準包裝:250 系列:56F8xxx 核心處理器:56800E 芯體尺寸:16-位 速度:60MHz 連通性:CAN,SCI,SPI 外圍設備:POR,PWM,溫度傳感器,WDT 輸入/輸出數:21 程序存儲器容量:40KB(20K x 16) 程序存儲器類型:閃存 EEPROM 大小:- RAM 容量:6K x 16 電壓 - 電源 (Vcc/Vdd):2.25 V ~ 3.6 V 數據轉換器:A/D 6x12b 振蕩器型:內部 工作溫度:-40°C ~ 125°C 封裝/外殼:48-LQFP 包裝:托盤 配用:MC56F8323EVME-ND - BOARD EVALUATION MC56F8323
R5F21114DFP#W4 制造商:Renesas Electronics Corporation 功能描述:MCU 16BIT R8C CISC 16KB FLASH 3.3V/5V 32LQFP - Tape and Reel
R5F21114FP 制造商:Renesas Electronics Corporation 功能描述:MCU 16-Bit R8C CISC 16KB Flash 3.3V/5V 32-Pin LQFP 制造商:Renesas Electronics Corporation 功能描述:MCU 16BIT R8C CISC 16KB FLASH 3.3V/5V 32LQFP - Trays 制造商:Renesas Electronics Corporation 功能描述:R5F21114FP
R5F21114FP#U0 制造商:Renesas Electronics Corporation 功能描述:MCU 16-Bit R8C CISC 16KB Flash 3.3V/5V 32-Pin LQFP Tray 制造商:Renesas Electronics Corporation 功能描述:MCU 16BIT R8C CISC 16KB FLASH 3.3V/5V 32LQFP - Trays 制造商:Renesas Electronics Corporation 功能描述:16-BIT FLASH MEM R8C TINY S 制造商:Renesas Electronics Corporation 功能描述:IC R8C MCU FLASH 16K 32LQFP 制造商:Renesas Electronics Corporation 功能描述:R5F21114FP