- 您現在的位置：買賣IC網 > PDF目錄297167 > R5106N361C-TR (RICOH COMPANY LTD) 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, PDSO6 PDF資料下載
參數資料
| 型號： | R5106N361C-TR |
| 廠商： | RICOH COMPANY LTD |
| 元件分類： | 電源管理 |
| 英文描述： | 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, PDSO6 |
| 封裝： | SOT-23, 6 PIN |
| 文件頁數： | 15/17頁 |
| 文件大?。?/td> | 948K |
| 代理商： | R5106N361C-TR |
R5106N
7
(7) When the signal to the INH pin is set from "L" to "H", the watchdog starts supervising the system clock, or
charge cycle to the CT pin starts, the capacitor connected to the CT pin is charged with the current of setting
Reset time of WDT
Watchdog Timeout period/Reset hold time
The watchdog timeout period and reset hold time can be set with an external capacitor to CT pin.
The next equations describe the relation between the watchdog timeout period and the external capacitor
value, or the reset hold time and the external capacitor value.
tWD (s) = 3.1
×106×C (F)
tWR (s) = tWD/9
The watchdog timer (WDT) timeout period is determined with the discharge time of the external capacitor.
During the watchdog timeout period, if the clock pulse from the system is detected, WDT is cleared and the
capacitor is charged. When the charge of the capacitor completes, another watchdog timeout period starts
again. During the watchdog timeout period, if the clock pulse from the system is not detected, during the next
reset hold time RESETB pin outputs "L".
After starting the watchdog timeout period, (just after from the discharge of the external capacitor) even if the
clock pulse is input during the time period "tWDI", the clock pulse is ignored.
tWDI (s) = tWD/10
Released Delay Time (Power-on Reset delay time)
The released delay time can be set with an external capacitor connected to the CT pin. The next equation
describes the relation between the capacitance value and the released delay time (tPLH).
tPLH (s) =3.7
×106× C (F)
The capacitor connected to CT pin determines tWD, tWR, and tPLH.
When the VDD voltage becomes equal or less than (-VDET), discharge of the capacitor connected to the CT pin
starts. Therefore, if the discharge is not enough and VDD voltage returns to (+VDET) or more, thereafter the delay
time will be shorter than tPLH which is expected.
Power on Reset Operation against the input glitch (tPLH1 < tPLH)
VDD
VCT
VRESETB
Complete
Discharge
+VDET
-VDET
+VTCT
-VTCT
tPHL
0V
tPLH1
Incomplete
Discharge
0V
tPLH
tPHL
相關PDF資料 |
PDF描述 |
|---|---|
| R5106N271A-TR | 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, PDSO6 |
| R5106N231C-TR | 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, PDSO6 |
| R5106N301A-TR | 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, PDSO6 |
| R5106N431A-TR | 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, PDSO6 |
| R5107G401C-TR-F | 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, PDSO8 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| R5107G | 制造商:RICOH 制造商全稱:RICOH electronics devices division 功能描述:Microprocessor Supervisory Circuit |
| R5108 | 制造商:HAMAMATSU 制造商全稱:Hamamatsu Corporation 功能描述:PHOTOMULTlPLlER TUBE |
| R5108_03 | 制造商:HAMAMATSU 制造商全稱:Hamamatsu Corporation 功能描述:PHOTOMULTIPLIER TUBE 28 mm (1-1/8 Inch) Transmission Mode S-1 Photocathode, Side-on Type |
| R5108G | 制造商:RICOH 制造商全稱:RICOH electronics devices division 功能描述:Microprocessor Supervisory Circuit |
| R51-0F..00199737 | 制造商:Sensata Technologies 功能描述:R51-0F..00199737 /POLE # 2 /PROD FAMILY: 0213 |
發布緊急采購，3分鐘左右您將得到回復。