
QLUM2208-PQ208C Device Data Sheet
17
QLUM2208-PQ208C Device Data Sheet
10.0 Device Pinout
10.1 Signals Overview
*: active low signal
NOTE:
Unused Pins (data busses) in the following tables are to be handled like "nc".
Table 11: Signals Overview Table
Signals
Description
wrxclk, wrxclav, wrxenb*,
wrxdat, wrxsoc
West Utopia Receive Interface.
wtxclk, wtxclav, wtxenb*,
wtxdata, wtxsoc
West Utopia Transmit Interface.
wrx_err, wrx_err_stat
West Interface error indication (sampled with wrxclk).
erxclk, erxclav, erxenb*,
erxdata, erxsoc
East Utopia Receive Interface.
etxclk, etxclav, etxenb*,
etxdata, etxsoc
East Utopia Transmit Interface.
erx_err, erx_err_stat
East Interface error indication (sampled with wtxclk).
prty_en, cellsize
Configuration Pins to be board wired.
reset
Active high device reset
GND
Ground
VCC
Device Power 2.5 V
clk(x)
unused clock inputs should be tied to GND
IOCTRL(x)
VCCIO(x)
IO Power 3.3 V
INREF(x)
connect to GND
PLLRST(x)
connect to GND or VCC
PLLOUT(x)
connect to GND or VCC
VCCPLL(x)
GNDPLL(x)
TCK, TRSTB
JTAG signals. connect to GND
TMS, TDI
JTAG signals. connect to VCC
TDO
JTAG signal. leave open
iov
nc
not connected. should be left open